Description: 1/3 HP, 1550 &/or 1075 rpm, 5 x 1/2, 230V, PSC Air Circulation Fan Motor Single or Two Speed, 2 speed options: High Efficiency, Energy Saver, Multi-Application Replacement for Shaded Pole Motors, Air Circulation Fans, Drum Fan, Shop Fan, Air Handler, Air Conditioners, Heat Pumps, & Blowers , Furnace, Fan Coil 1550 RPM @ 1.8 Amp &/or 1050-1100 RPM Frame: 5”, NEMA® 42, GE 29, stud mounting, open ventilation- air over Rotation: ECCW, Either CW or CCW, connected as CCW rotation at factory Permanent Split Capacitor (PSC) 4 Pole, 50/60 Hz, includes required Capacitor 8MFD/330VAC Thermally Protected L, INS CL130(B), E62862 Full Load Amperes (FLA) .66 high / .41 low Shaft: 3 1/4” x 1/2”, sleeve bearings Motor Length Less Shaft = 4” with capacitor detached, or 5 3/8” including capacitor mounted on bottom COM-white, HIGH-black, LOW-red, 0.327 horsepower (1/3 hp) Weight: 12 lbs. Made in USA Two Year Manufacturer's Warranty Brand New, never used. These came as bulk skid so there was never an original box. There may be scuffs and scratches that do not effect operation. McMillan Electric Co., Manufactured: June 2021 Model A1828B3572, E62788, E62815 Applications: Universal replacement for shaded -pole motors. Permanent-Split Capacitor motor can replace an equivalent Shaded-Pole motor since it is twice as efficient,and its amp draw is about 1/2 as great. Air Moving (furnace fans, air handlers, blowers, air conditioners, exhaust fans, etc.) Commercial Refrigeration (walk-in coolers, beverage coolers, display cases, etc.) Powr-Flite Fan Motor Industrialtwo (2)-speed air circulation drum fan Portable Fan Shop Fan Exhaust Fan HeatPump Condenser Fan Air Conditioner Fan Coil AirHandlers Heater Blower Fan HVAC Furnace Blower Fan A/CCondenser DrumFan Floor Drier Mechanically reversing rotation is possible. Since the stator is positioned exactly in the center of the motor and has thru-bolts, you can use the following procedures for reversing: 1. Remove the thru-bolts. 2. Remove one end shield. 3. Remove stator, turn it around, then re-insert it. Leads should be pulled through the availableend shield ventilating openings. 4. Replace end shield, thru-bolts, and re-tighten thru-bolts. 5. Check that shaft turns freely. If shaft is tight, tap motor lightly with non-metallic mallet. It may sometimes be necessaryto loosen and re-tighten thru-bolts PSC type motors are used where higher starting torques are needed than what a shaded-pole motor will provide. They are also used where higher efficiency motors are required. Due totheir efficiency, they have become the motor of choice versus a shaded-pole design. They are used to drive blowers and all the other air-moving applications where shaded-pole motors are found. They also are manufactured inhigher horsepower ratings than what can be found in shaded-pole designs. Therefore, they get used in heavier duty applications such as outside condensers. A PSC motor can usually be recognized by the capacitor that is connectedto it. Also, between the main pole windings in the motor, there are pole windings of finer wire. This is the auxiliary winding.
Price: 80 USD
Location: White Hall, Arkansas
End Time: 2023-12-15T13:50:57.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Mcmillan Electric
Type: Portable Drum Blower Fan
Power Source: Electric
Features: High Velocity
Material: Metal
Country/Region of Manufacture: United States
Number of Speeds: Two, or choose either One individually
