Description: Vortex Viper / Venom (fits Burris FastFire and Docter) Adapter Plate for HK VP9 OR ' VP9L Optics Ready Mounting Plate Mounting hardware is included. This mount fits: All HK VP9 Optics Ready Models HK VP9 Optics Ready HK VP9L Optics Ready HK VP9 Tactical Optics Ready If your gun has a cut out for the optics plate, this plate will work with your application. (This mount is comparable to the HK VP9 Optics Ready #5 Plate) The screws that come with your slide to mount the plate to the slide may be reused. They are also available for purchase from the drop down above. HK recommends replacing the plate mounting screws after 2,000 rounds. HK recommends torquing the screws for the plate to 2Nm or 17.7 in/lbs. The screws to mount the red dot to the plate are provided at no extra cost. We recommend using 15 in/lbs. Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.921" Overall Width: .99" Torque Specs: 15 in/lbs Mounting Hardware: (2) 6-32 Button Head Screws - Requires 5/64 Wrench or Driver (2) 6-32 Flat Head Screws - Requires 5/64 Wrench or Driver Red Dot Fitment: Vortex Viper Vortex Venom Burris Fast Fire 1, 2, 3, 4 Docter ADE RD3-001 ADE RD3-002 ADE RD3-009 UTG Reflex Micro Dot Crimson Trace CTS-1200 Crimson Trace CTS-1300 Sightmark Mini Shot Sightmark Core Shot *All ADE mounts require 6-32 x 3/8" screws. Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins. Simply remove the plate on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Red dot mounting hardware included. Installation Instructions - Remove the rear cover plate - Install the EGW sight mount and torque the mounting plate screws - Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws - Torque red dot mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Price: 47.49 USD
Location: Victor, New York
End Time: 2025-01-11T18:14:51.000Z
Shipping Cost: 4.57 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Evolution Gun Works
Type: Handgun Base
For Gun Make: Heckler & Koch
For Gun Type: Pistol
Material: Aluminum
Model: 49287
Mounting: Dovetail
Mounting Location: Rear Sight
Sport/Activity: Shooting
California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Color: Black
Country/Region of Manufacture: United States
Item Weight: 2.1
Manufacturer Warranty: Lifetime
Set Includes: Screws
Unit Quantity: 1
MPN: 49287
