DPA 4055 Kick Drum Microphone

Description: Capture the true character of your kick drum with the DPA 4055. Eschewing the practice of pre-EQ-ing a microphone to produce an ideal kick tone, DPA decided you should be the judge of that nirvanic goal. The 4055's flat frequency response captures and reproduces what's there and nothing more. An asymmetric design means you can place the mic inside or outside the drum, with the only placement criteria being how it sounds. The rugged design allows for use on stage or in the studio. An integrated capsule shock mount and internal wind damping isolate the mic from vibration transfer, ensuring all you hear is the source. And with a 164dB peak SPL (Sound Pressure Level), feel free to position the 4055 inside the kick and point it directly at the beater to capture all the attack you can handle. You know what you want. Get it with the DPA 4055 kick drum microphone.DPA 4055 Includes:1 x 4055 Kick Drum Microphone1 x UA0961 Microphone HolderDPA 4055 Features:Picks up the clear, true sound of the kick drumFlat frequency response so you can shape the sound your wayBuilt tough to withstand rough use on the live stageAsymmetric design for easy placement inside or outsideDPA 4055 Specifications:Directional pattern: Open CardioidPrinciple of operation: Pressure gradientCartridge type: Pre-polarized condenserFrequency response: 20 Hz - 20 kHzEffective frequency range ±2 dB, at 20 cm (7.9 in): 40 Hz - 18 kHz with a 6 dB soft boost at 10 kHzSensitivity, nominal, ±2 dB at 1 kHz: 2 mV/Pa; -54 dB re. 1 V/PaEquivalent noise level, A-weighted: Typ. 27 dB(A) re. 20 µPa (max. 29 dB(A))Equivalent noise level, ITU-R BS.468-4: Typ. 39 dB (max. 41 dB)Distortion, THDDynamic range: Typ. 132 dBMax. SPL, THD 10%: 164 dB SPL peakRated output impedance: 380 ΩMinimum load impedance: 2 kΩCable drive capability: 100 m (328 ft)Output balance principle: Impedance balancing with Active DriveCommon mode rejection ratio (CMRR): >55 dBPower supply (for full performance): P48 (Phantom Power)Current consumption: 2.0 mAConnector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phaseColor: Matte blackWeight: 241 g (8.5 oz)Microphone diameter: 57 mm (2.24 in)Capsule diameter: 17 mm (0.67 in)Microphone length: 132 mm (5.19 in)Maximum output voltage, RMS: 9.75 VPolarity: +V at pin 2 for positive sound pressureTemperature range: -40°C to 45°C (-40°F to 113°F)Relative humidity (RH): Up to 90%

Price: 780 USD

Location: Verona, Wisconsin

End Time: 2024-10-25T10:13:55.000Z

Shipping Cost: 0 USD