DIY KIT IN-14 Arduino Shield NCS314 Nixie Tubes Clock with Acrylic [WITH TUBES]

Description: DIY KIT for IN-14 Arduino Shield Nixie Tubes Clock NCS314 Shield in Acrylic Case with Columns Sockets and Arduino UPS Expedited delivery highly recommended Economy shipping can be slow and unreliable Project “Divergence Meter mini” with AcrylicDIY KIT for IN-14 Shield Nixie Tubes ClockArduino Shield Nixie Tubes Clock with ColumnsDesigned for 6 IN-14 xUSSR Nixie Tubes with SocketsIN-14 Tubes are the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesShield options include Tubes, Columns, Sockets and Power SupplyAccessories include Temp. sensor, GPS Receiver, IR RemoteShield Clock is designed for Arduino UNO and MEGA 2560 BoardsIt allows you to write your own unique programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH DIY KIT for IN-14 Arduino Shield NCS314-6 Nixie Tubes Clock with Columns and Sockets in Acrylic CaseThis is example of assembled IN-14 Shield Clock in Acrylic Case Listing contains all parts and components to build IN-14 Arduino Shield Clock in AcrylicParts include: Shield Board, Arduino UNO, Tubes, Columns, Sockets, Acrylic Case and Power Supply Listing includes: Tubes Shield NCS314-6 Board Bare PCBSet of Electronic Parts and Components for Shield NCS314-6 Tubes BoardSet of Hex Spacers and Screws for Shield NCS314-6 and Arduino BoardsSet of Socket Pins for 6 IN-14 Nixie Tubes (included with the Shield Board)NE2H Neon Bulbs for Dots – 3 pcs (2 Neons for Dots and one spare)IN-14 Nixie Tubes – 6 pcs Set (included with the KIT)Columns with Dots – 2 pcs (included with the KIT)Arduino Control Board – (included, UNO Control Board)Power Supply (12V, 1A) (US, EU, UK, AU) (included, optional AC plug)Clear Acrylic Case for IN-14 Shield Nixie Clock (included, disassembled)Principal Electrical Scheme for Shield NCS314-6 Tubes BoardBOM List for Shield NCS314-6 Tubes BoardUser Manual on vintage style paper This Listing contain all needed parts for Shield Nixie Clock, however you can find optional parts as well by links below: We are selling already flashed Arduino UNO here: (Uno) www.ebay.com/itm/162377278951Flashed Arduino Mega here: (Mega) www.ebay.com/itm/162377285626Power supplies: www.ebay.com/itm/162367596648Beautiful Acrylic Case ACNS314 v3.3 at a price of $ 34.95 www.ebay.com/itm/162736300779Glass Column: www.ebay.com/itm/162276387248GPS Receiver GA-6: https://www.ebay.com/itm/162682147400IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139 …And upload software into your Arduino Link to (software) github.com/afch/NixeTubesShieldNCS314 Link to (video tutorial) Dear customers!If you have ANY questions, (PLEASE ASK us). Our Benefits:Easy to build beautiful clock – we offer case.Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.Fast uploading via USB.The latest version of the firmware is always available on GitHub.No need for additional drivers – we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menu.Very high qualty PCB.Japan alluminium capacitors.Power-On Self-Test.Competent Technical support. Software Features: Shield support 6 IN-14 Nixie tubes [hh:mm:ss] Full static display mode Slot Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) High precision time chip DS3231 with Backup battery Acquiring time via external GPS module (only with Arduino Mega) 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 12V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in) Shields comparison table: https://youtu.be/58xMATPCJ-I https://youtu.be/FMEhx8zmo_0 Actual photos of KIT: Arduino Nixie Tubes Clock Shield NCS314 Top View Arduino Nixie Tubes Clock Shield NCS314 bottom View Boards Dimensions in 2D and 3D Acrylic Case for IN-14 Arduino Shield Nixie Clock: Acrylic Case sent disassembled for safe delivery Nixie Tubes Clock Shield IN-14 Arduino NCS314 in Acrylic This is example of assembled IN-14 Arduino Shield NCS314 in Acrylic: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged

Price: 184.95 USD

Location: Dnipropetrovsk

End Time: 2024-09-19T17:16:37.000Z

Shipping Cost: 18.95 USD

Product Images

DIY KIT IN-14 Arduino Shield NCS314 Nixie Tubes Clock with Acrylic [WITH TUBES]

Item Specifics

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 60 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

Shape: Rectangular

Model: DIY KIT IN-14 Shield NCS314

Character: Nixie Clock

Country/Region of Manufacture: Ukraine

Department: no

Style: Vintage/Retro

Custom Bundle: No

Item Height: 78

Item Width: 90

Product Line: Shield NCS314

Smart Home Compatibility: no

Material: Acrylic

Theme: Art

Original/Reproduction: Original

Movement: Quartz (Battery Powered)

Power Source: Electrical

Type: DIY KIT Arduino Shield Nixie Tubes Clock

Features: 12 Hour Display, 24 Hour Display, 3.5mm Auxiliary Input, Alarm, Battery Backup, Color Changing, Day/Date Display, Non-Ticking/Silent Sweep, Silent/No Ticking, Temperature Display

Smart Home Protocol: no

Color: Blue

Year Manufactured: 2020

MPN: DIY KIT Nixie Clock

Finish: Blue

Item Length: 240

Frame Material: Glass

Room: Laundry/Utility Room, Playroom, Bathroom, Bedroom, Dining Room, Garage, Hallway, Home Office/Study, Kitchen, Living Room, Porch, Sunroom

Character Family: IN-14 Arduino Shield

Engraved: No

Brand: GRA & AFCH

Number Type: Arabic Numerals