DIY KIT IN-14 Arduino Shield NCS314 Nixie Tube Clock 12/24H GRA&AFCH

Description: DIY KIY IN-14 Nixie Tube Clock Shield Arduino UNO or MEGA NCS314 UPS Express delivery highly recommended Economy shipping very slow and unreliable DIY KIT for IN-14 Shield Nixie Clock with ColumnsDeveloped for 6 IN-14 xUSSR Nixie Tubes with SocketsIN-14 Tubes are the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClocks features Startup Tune, RGB backlight, USB port for updatesDIY KIT developed for Tubes Shield Board and Control Arduino BoardOptions include Tubes, Columns, Sockets, Arduino, Power SupplyAccessories include Temp. sensor, GPS Receiver and RemoteDIY KIT is made for Arduino UNO and MEGA 2560 Control BoardsIt allows you to write your own unique programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH Listing includes: Tubes Shield (NCS314) Bare PCBSet of Electronic Parts and Components for Shield (NCS314) BoardSet of Screws and Spacers for Shield and Arduino BoardsNE2H Neon Bulbs for Dot – 2 pcs (+one spare)IN-14 Nixie Tubes – 6 pcs (included with the KIT)Principal Electrical Scheme (NCS314) (on paper)BOM List for Shield (NCS314) BoardUser Manual for Arduino Shield Clock on a Vintage style paper The base listing contains only BARE PCB, Nixie Tubes and full set of electronics parts Without Arduino, columns and power supply This is example of assembled board NCS314 with full complectation This listing does NOT contain the Arduino Board and Power SupplyWe are selling already flashed Arduino UNO here: (Uno) www.ebay.com/itm/162377278951Flashed Arduino Mega here: (Mega) www.ebay.com/itm/162377285626Power supplies: www.ebay.com/itm/162367596648Beautiful Acrylic Case ACNS314 v3.3 at a price of $ 34.95 www.ebay.com/itm/162736300779Glass Column: www.ebay.com/itm/162276387248GPS Receiver GA-6: https://www.ebay.com/itm/162682147400IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139 …And upload software into your ArduinoLink to (software) github.com/afch/NixeTubesShieldNCS314Link to (video tutorial) Dear customers!If you have ANY questions, (PLEASE ASK us). Our Benefits:Easy to build beautiful clock – we offer housingEasy to customize firmware under Your own needs, thanks to an open platform – Arduino.Fast uploading via USBThe latest version of the firmware always available on GitHubNo need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menuVery high quality of Printed Circuit BoardsJapan aluminum capacitorsPower-On Self-TestTechnical support Software Features:Shiled support 6 IN-14 Nixie tubes [hh:mm:ss]Full static display modeSlote Machine (Ani poisoning)Temperature display (DS18B20) [Celsius or Fahrenheit]GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included)Operation via IR remote control (Remote control Sony RM-X151, not included)No need refresh or update information on the tubesThe maximum possible brightness of the tubes12/24 hour format.Date format: DD:MM:YYUnique RGB LEDs backlight with 16,7 million colors.Very easy to switch LEDS off/on.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).Easy updating firmware via USB using Arduino IDE.Power On Self-Test (POST): LEDs test, tubes test, sound test. Hardware Features:Integrated High Voltage Power supply: 150 – 220V.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).Test points for testing, adjusting and controlling low and high voltage circuits.Internal buzzer.RTC (Real Time Clock) High precision time chip DS3231 with Backup batteryAcquiring time via external GPS module (only with Arduino Mega)3 buttons on board to controlPotenciometer to adjust High VoltageIR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library)Temperature sensor DS18B208 pcs of RGB SMD LEDsSPI up to 4MhzPlaces for 2 column with 2 neon dots insideSeparate controls upper and lower dots.Power consumption: 12V, 760mA. Recommended: 12V, 1-2A (center pin positive +)Reverse polarity protectionNixie Tubes Shield NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in) Shields comparison table: https://youtu.be/58xMATPCJ-I https://youtu.be/FMEhx8zmo_0 Actual photos of KIT:Arduino Nixie Tubes Clock Shield NCS314 Top ViewArduino Nixie Tubes Clock Shield NCS314 bottom View Boards Dimensions in 2D and 3D IN-14 Nixie Tubes Clock Shield NCS314 with Arduino by GRA & AFCH:This is example of assembled board NCS314 – complete SetThe base listing contains only BARE PCB and full set of electronics parts (Arduino, Columns and Power Supply are EXCLUDED from set). User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return informationAll Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standard shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zealand:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zealand:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zealand:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged

Price: 157.45 USD

Location: Dnipro

End Time: 2023-12-27T20:48:09.000Z

Shipping Cost: 18.95 USD