Dental Adhesive Kit /Light Cure/Etching Gel Universal /Mini No-Mix Bonding Resin

Description: Ship from USA to USA Descriptions: Universal ResinIntroductionINDICATIONS FOR USE:Direct restoration for all class caries.Restoration of teeth defect and veneer.Package:REFILL:Light Cure Composite: 4g/Syringe*5Syringe Needles : 5pcs/ box*1Total Etching Adhesive: 5ml/Bottle*1Etching Gel: 2.5ml/Syringe*1Applicators Brushes: 20pcs/box*1Net weight: 188.4gCOLOR: A1,A2,A3,A3.5,B1FEATURES & ADVANTAGES:Unique dispersion technology ensure the filler evenly distributedRadioopaque and fluoride releasing Optimal polishability and high shade stability.Excellent handling, not sticky to instrument;Suitable for most cases of restoration, extensive indication of usage.INSTRUCTIONS：(1)Preparation: isolate and prepare tooth.(2)Cleaning: rinse the preparation with water.(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time. (4)Applying Dentex Self-Etching Light Cure Adhesive (DSA):dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entirepreparation with a little brush until a shiny surface is achieved and then wait for 10seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporatethe solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should beused according to the manufacturer's instruction).(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposuresurface less than 4 mm.(6)Applying Dentex light cure composite (DLC): place selected DLC into cavitypreparation following by light cure. According to following table, the curing time isrecommended for different depth and color shades. In order to reduce shrinkage stress, fora large cavity, an increment filling is recommended. In general, 1-2 mm increments areplaced into cavity preparation from different sides and the restoration is builtincrementally. Each increment is light cured for 30 seconds.(7) Finishing: after light cure, adjust restoration.(8) Polishing: use polishing strip or disc to polish the surfaceWARNING:Do not use this product for patient who is allergy to methylmethacrylate. Do not use thisproduct with any material contained eugenol. PRECAUTIONS: Methmethacrylate resins may cause skin sensitization in susceptible persons. In case ofcontact, wash skin with soap and water. In severe situation, get medical attention. ATTENTION: To an exposed pulp, a pulp capping material such as Calcium hydroxide may be usedbefore using this product. STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure.Recap the syringe after use.DISPOSAL:After the product is used up, dispose it as normal medical rubbish.SHELF LIFE: 3 years++++++++++++++++++++++++++++++++++++Orthodontic Adhesive Kit Description Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel. It is of high viscosity and thus prevents bracket drifting and reduces material waste. As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained. INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets Packing list: Orthobond Light Cure Adhesive Primer 6ml*1 bottle; Etching Gel 5ml*1 syringe; Light Cure Adhesive Paste 4g*3 syringe; Little brush 20; Syringe tip:5 STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. ++++++++++++++++++++++++++ No-Mix Bonding ResinSpecifications:1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material. 2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength. 3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories. Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolatetooth and blow-dry.Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and drywith clean air. If the enamel does not have a chalky appearance, pls. repeat the process;Brushing: apply a thin layer of the primer over the etched enamel with the brusher;Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within20 sec, give pressure for 5 to 10 secand remove the excessive primer and paste after 40 to60 sec; then do orthodontic procedures followed 5-min curing. Packaging Detail: 3 x black syringes (3.5g)1 x primer bottle (10ml)35 x Brushes ++++++++++++++++++++++++++++++ Light Cure ResinWarning:Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers areknown to produce allergic skin reactions in certain sensitive individuals. May cause eyeand skin irritation.Precautions: A void eye and skin contact. Wear gloves when handing this material.Precaution:Please follow manufacturer's directions on the handing, proper use andrecommendations for eye protection, when using a curinglight This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive Contents: 3 x Adhesive paste Syringes (10.5g)1 x Primer Bottle (8ml)40 x Brushes1 x Instruction Booklet++++++++++++++++++++++++++++++++++Mini No-Mix Bonding ResinSpecifications:1. This product is one kind of orthodontic direct bonding system resin with aromatic bisdimethyl acrylate resin as its main material.2. As a new-type orthodontic direct bonding system, it is convenient to use with littlewaste, easy to handle independently and has a favorable clinical bonding strength.3. It consists of primer and paste with acid etchant, spatulas and small brusher as itsaccessories.Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolatetooth and blow-dry.Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and drywith clean air. If the enamel does not have a chalky appearance, pls. repeat the process;Brushing: apply a thin layer of the primer over the etched enamel with the brusher;Packaging Detail:1 x bottle（3ml）Primer1 x Syringes (3.5g each)Paste1x Syringes (2.5ml)etchant Gel20x Brushes1xSyringe tipSTORAGE:Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap thesyringe after use. ++++++++++++++++++++++++++++++++++ Blue Glue Light Cure ResinDescription:Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel.It is of high viscosity and thus prevents bracket drifting and reduces material waste.As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained. INDICATIONS FOR USE: Direct bonding of metal and ceramic bracketsFeature:This orthodontic adhesive provides a longer working time and a rapid setting time. Can beplaced directly into bands. Excess flash is easy to clean up prior to the light curing and thecement is easy to see due to the blue color.It contains fluoride to reduce the chance of declacification.Packing list:1 x Etchant acid Gel 2.5ml syringe;1 xLight Cure Adhesive Paste 5g syringe;1 x Syringe tipBox size: 17*11*2.5cmSTORAGE:Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. FDA StatementThe sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.Seller name:DentalbravoCity,State:SHENZHEN,ChinaTelephone number:0755-36925817 FDA for Tooth Bonding: 510(K)Number: K232978, Regulation Number: 872.3200, Product Code: KLE FDA for Resin: 510(K)Number: K180463, Regulation Number: 872.3690, Product Code: EBF This product expires on 05/2025 or better.

Price: 20.23 USD

Location: Fullerton, California

End Time: 2024-05-17T20:08:22.000Z

Shipping Cost: 0 USD