DCT Picture Photo Framing Miter Joint Clamp – Rods, Couplers, Thumb Nuts, and...

Description: Safely glue picture frames with the DCT Picture Photo Framing Miter Joint Clamp - Rods, Couplers, Thumb Nuts, and Corners - Woodworking Frame, Box, Cabinet. It simultaneously tightens all four corners to produce solid, perfectly square frames without damage and can also be used to clamp boxes, cabinets, and other furniture. You can glue all styles of frames from 2 x 2 inches to 48 x 48 inches (developed length of coupled pieces depends on how much thread you use to screw them into the coupler; seamlessness of joint depends on the accuracy of miter cuts). Use 4 rods to clamp anything under 23.5 x 23.5 inches, and use 8 rods (4 sets of 2 rods connected with a brass connector) to clamp anything 25.75 x 25.75 inches and higher. This package includes 8 rods, 4 couplers, 4 nuts, and 4 corners. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. SAFELY TIGHTEN CORNERS: The DCT Picture Photo Framing Miter Joint Clamp – Rods, Couplers, Thumb Nuts, and Corners – Woodworking Frame, Box, Cabinet is your solution to safely gluing together various sizes of picture frames to produce solid, perfectly square frames free of side frame damage; Tightens all four corners simultaneously and also used to clamp boxes, cabinets, and other furniture CREATE A VARIETY OF SIZES: Accommodates frames from 2 x 2 inches (5.1cm x 5.1cm) up to 48 x 48 inches (121.9cm x 121.9cm) (with use of the included threaded rod couplers/splicing blocks); 1 rod = 24 inches; Easily clamps all styles of frames and works best for square (perimeter to back) frames, cabinets, or any rectangular or box shape that is being glued together; Developed length of coupled pieces will depend on how much thread you use to screw them into the coupler EASY TO USE: By measuring the diagonals, you can make adjustments to square things up; 4 rods can be used to clamp anything under 23.5 x 23.5 inches (59.7cm x 59.7cm); 8 rods can be used (4 sets of 2 rods connected with a brass connector) to clamp anything 25.75 x 25.75 inches (65.4cm x 65.4cm) and higher; You can also mix the to achieve any rectangular size in between BUILT TO LAST: Plated rods are fully threaded; Thumb nuts turn dials make accurate and easy corner adjustments; L-shaped corners are constructed from solid and beveled die-cast metal; Rod coupler splice extension sleeves are constructed from 7/8-inch long polished brass hexagonal tubing CONTENTS: Package includes (8) 24-inch rods, (4) coupler extensions, (4) thumb nuts, and (4) corners

Price: 55.78 USD

Location: Mount Prospect, Illinois

End Time: 2024-12-04T02:24:38.000Z

Shipping Cost: 0 USD