Description: Feature: This Multi-function Digital meter can measure AC voltage, AC current, active power, power factor, power frequency and electric energy. HD LCD has adopt for display module Technical Indicators 1.Accuracy: 1%±2 words 2.Range: AC voltage: AC 80.0-300.0V AC current: AC 0-99.99A, minimum resolution is 0.01A Power frequency: 45.0Hz-65.0Hz Power factor: 0.00-1.00PF Active power:0-45000W when the active power between 0 and 9999.9W, the display accuracy is 0.1W Electric energy: 0-9 99999kwh,when the electric power between 0 and 999.99kwh, the display accuracy is 0.01kwh, when between 10000.0-9999.9kwh, the display accuracy is 0.1kwh，when between 10000.0 and 999999kwh, the display accuray is 1kwh. 3.Speed: 2 times per second 4.Size: 79*43*48mm 5.Installation Size: 76*39mm …… Features: 1. Power-off memory. & with start-stop switch. 2. Built-in fuse prevents main circuit from burning after short circuit, the motor current increases slowly during startup, Effectively protecting the motor without impact and extending the service life of the motor and drive. 3. Duty cycle 0-100% adjustable, the upper and lower limits of the starting duty cycle and operating frequency can be set. 4. The digital encoder has 360-degree step less speed regulation. Higher accuracy and better stability. 5. Standard 5135 instrument case (79mm*42mm*26mm), practical and easy installation. Parameters: Working voltage: DC 7-60V Rated current: 15A Power: 600W (max.) Adjustable frequency range: 1 KHz~99 KHz (1 KHz step) PWM duty cycle: 0%-100% (1% step) Size: 79mm x 42mm x 26mm Operation: Short press: switch motor start or stop. Counterclockwise rotation: duty cycle decreases. Rotate clockwise: duty cycle increases. Press and hold for 5 seconds: enter the setting interface 1. Short press selects setting parameters: 1.1 Output or not when power on (ON/OFF) 1.2 Duty cycle lower limit (Display as: "L"+ two digits). 1.3 Duty cycle upper limit (Display as: "H"+ two digits or "100"). 1.4 Operating Frequency (Display as: "F" + two digits). 2. Clockwise rotation: Increase the setting parameters. 3. Anticlockwise rotation: Reduce the setting parameters. 4. Press and hold for 2 seconds: Exit the setting interface. Remote Control: The remote control has been paired before ship, can be work when you received. Battery Needed: 12V 23A Remote Control: EV1527 Chip (433MHz). Note: 3.This PWM Motor Governor is only work for 2-wire Brush Motor. 4.Battery for Remote Control is not included.
Price: 14.34 USD
Location: hongkong
End Time: 2024-08-12T07:33:58.000Z
Shipping Cost: 2.99 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Unbranded
Maximum Amperage: 15A
Power Source: DC
Voltage: 7-60V
MPN: Does not apply
