CXRacing Bolt-on Turbo front mount Intercooler Kit For 10-13 2nd Gen MazdaSpeed3

Description: CXRacing ebay PN: KIT-MS3-2G-IC0036-M-BOV009-BLS CXRacing Front Mount Intercooler + Piping Pipe Tube Kit For 2010-2013 2nd Gen MazdaSpeed3 2.3L DISI Turbo Totally New Development From Scratch, Fully Tested, Dyno Proven Gains 23HP, 31 Lb-ft. 60 Degree Cooler Intercooler + Piping + BOV + Silicon Hose + T-Clamp + Bracket CXRacing Is Proud to Introduce Their New FMIC (Front-Mount Intercooler Kit) For The 2nd Gen MazdaSpeed3. Designed to Replace The Restrictive Factory Top-Mount Intercooler, The New FMIC From CXRacing Offers Improved Flow, Position and Increased Surface Area , Substantially Reduce Charge Temperatures and Eliminate Heat Soak. Rather Than Mount The Intercooler Under The Hood Where It Receives Minimal Air Flow (Despite The Hood Scoop) and Is Constantly Surrounded By Engine Heat, The FMIC For The 2nd Gen MazdaSpeed3 From CXRacing Features an Optimum Front-Mount Position to Maximize Exposure to (High-Speed) Ambient Airflow. This Not Only Increases Overall Cooling at Every Boost Level, But Dramatically Reduces Heat Soak. Extensive Dyno Testing with The Factory Top-Mount Intercooler Revealed That The Charge Temperatures Continued to Escalate with Each Successive Run. The Factory Intercooler Was Simply Not Able to Keep Pace and Suffered From Extreme Heat Soak After Only 3 Consecutive Runs-Charge Temps Increased By Over 40 Degrees! (Imagine What This Situation Would Be Like at an Open-Track Event!) By Contrast, The New FMIC From CXRacing Dramatically Reduced Inlet Charge Temperatures and Maintained That Level of Cooling Run After Run. The Difference In Charge Temperature Between The Stock Intercooler and New FMIC From CXRacing and After 3 Consecutive Runs Was an Over 60 Degrees! Bolt On FMIC Upgrade to Factory Top Mount Intercooler. No Cutting, Welding or Fabricating Necessary 48% Increase In Surface Area (Over The Stock Intercooler) to Maximize Charge Cooling Optimum Front-Mount Position For Maximum Exposure to (High-Speed) Ambient Airflow High Quality Intercooler, 26.5"X6.25"X2.75" Core. This Core Is Specially Designed For MS3, Which Has 3" Extra Length, Compare to Similar Size Core on The Market. Maximize Available Space Accepts Factory Mazda or CXRacing BOV (Comes with The Kit) 2.5" Aluminum Polished Piping with Silicon Hoses and T-Clamps High-Quality Aluminum and Stainless Steel Mounting Brackets, T-Bolt Clamps Decrease Charge Temps By Over 60 Degrees Over Stock Intercooler Decrease Heat Soak & Improved Repeatability Dramatically Reduce Harmful Detonation and/or Timing Retard Chassis: 2010-2013 2nd Gen MazdaSpeed3 Motor: 2.3L DISI Turbo This Listing is for the Parts Listed Below, All Other Parts Shown Are NOT INCLUDED. x1 Aluminum Intercooler, with Mounting Brackets x1 Aluminum Piping Kit x1 Set of Silicon Hose (Blue) x1 Set of T-bolt Clamp x1 BOV 　　 Intercooler: Bar & Plate Intercooler, 26.5"X6.25"X2.75" Core Size, 33.5"X6.25"X2.75" Overall Size, 2.75" Thickness Core, 2.5" Inlet/Outlet Piping Kit: Mandrel Bent Aluminum Pipe Comes with BOV, Silicon Hoses, and T-Bolt Clamps 　 SHIPPING & RETURNSS • All shipping and handling fees are non-refundable in any circumstances. For Return item, if it is free shipping, 20% re-stocking fee will be applied. • Shipping cost included on listing is for US Continental 48 States only. • PO box, APO, FPO, HI, AK, PR, GU, VI and other countries, shipping and handling fees cost more. • For shipments to California addresses, we are required to collect the most current tax rate. • Buyer pays shipping for return item regardless the reasons. DESTINATION SHIPPING METHOD ETA COST PR, Guam, VI, AK, APO, HI USPS $150 Canada USPS or FedEx $270 Other Countries USPS or FedEx $393

Price: 599.99 USD

Location: South El Monte, California

End Time: 2024-08-23T05:08:05.000Z

Shipping Cost: 0 USD