Description: Note: This building normally takes 30 days to make but can take up to 60 days max to make. Up for sale today I have a custom scale Mansion. This building has a flat back so it can me put by a wall. Was designed by me and is a 3d printed building. This model has over 10,000 bricks but are a bit hard to see do to the plastic being glossy. There is a small gap between the smaller roof segments that connect the large roof segments best seen in the last picture. Measures approximately: 38 1/2 inches wide (roof stick out a extra 1/4th in each direction)16 3/4 inches at tallest point (chimney) 15 inches deep (17 deep including entrance) This building by default comes in White but can be made in: White, Black, Silver, Aluminum, Red, Green, or Gray. If you want it in a different color contact me BEFORE buying. This is a 3D printed building. If you look at it closely it will have layer lines. Iv done the majority of the cleanup but may need some additional cleanup. 3D printers are not a perfect technology there may be small defects. Be sure to check my selling page for more model railroad goodies! Thanks for looking and please ask questions if you have any. Want this in a different scale or size? In most cases I can adjust the scale to any size or increase/decrease size to meet your needs. Please contact me for more info. Price will be based on size.
Price: 600 USD
Location: Old Hickory, Tennessee
End Time: 2023-10-11T19:07:44.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Type: House
Brand: Nickdo3D
MPN: Does Not Apply
