[Custom Keyboard] Keychron Q1 V2 75% Knobless (Read Desc for Details)

Description: Selling this keyboard, as I am getting rid of stuff I no longer use/need anymore. I was only used for about a year (on and off). List below are the specs of the keyboard, the condition they are in, and the overall description of the parts: + Barebone Knobless Keychron Q1 V2 kit in Navy Blue - The case is in pretty good shape overall. Do note that the left side and corner left side are a tad faded from use. It's not super noticeable and fairly minor, but it is something to note. Comes with PCB foam, a thin layer of case foam and the 75% PCB (compatible with VIA) as well. Also including the original box. + Stock Screw-In PCB Stabilizers - Originally came with the kit. Both the wire and housing are lubed with Krytox GPL 205GD0. It sounds pretty good, so I never bothered swapping them. + Off-brand FR4 Black plate - Bought from Aliexpress (XRXKJ store) as they never restocked the official plates from the Keychron website. I replace the original steel plate with an FR4 one, as I did not like how steel felt to type on. I tossed the original steel plate, as I had no use for it. So, the original steel plate is NOT INCLUDED! + Lilac Linear Switches - Springs and switches are lubed with Krytox GPL 205GD0 lube from Kinetic Labs. Every key, except for the ESC, F1 - F12, DEL, INS, PGUP, PGDN and HOME keys, have these switches. They originally had springs weighing at 62g, but were replaced with SPRiT MX Supreme 50g Springs for shorter actuation force (great for FPS games). Unfortunately, I DO NOT have the original springs that came with the Lilacs. These switches were also used and soldered onto different keyboard. Decided to have them soldered off and use them for this kit. It has solder markings on the bottom near the pins (as seen on the last pic) but this does not hinder functionality; only makes the pins easier to bend, so be careful if you decide to take them out. SEE PICS 4 AND 5 FOR A VISUAL + Thic Thock Marshmallow Linear Switches - I ran out of Lilacs for the top and right side of the keyboard, so I used these I had laying around. Lubed with Krytox GPL 205GD0 lube from Kinetic Labs with Deskeys films for stability. They are only used for the ESC, F1 - F12, DEL, INS, PGUP, PGDN and HOME keys. Has nice "poppy" springs that has an actuation force of 50g and a bottom-out of 68g. Since these keys are used significantly less often, it does not interfere with your typing/gaming experience. SEE PICS 4 AND 5 FOR A VISUAL + PolyCaps Whale Double-shot PBT Keycaps - These are no longer in stock and can't find them anywhere. Has a nice color scheme and it sounds pretty good. Do note that some of the keycaps do have some shine (specifically the WASD keys and L-Shift key). Also, I am including the original box and left over keycaps. List of miscellaneous items that are also included: + 2 layers of painters' tape on PCB (tape mod) - Basically just makes the switches/keycaps sound deeper and "thockier." I've used this for all of my keyboards that I had built and this mod never caused problems. + Stock navy blue keychron usb cord (pic #14) + Extra MX Supreme 50g springs (pic #15) + Keycap puller (pic #15) + Spare keychron screws/pads for the case (see pic #15) + Screws and standoffs for the FR4 plate - I never used these, as the plate is secure enough with the switches themselves (see pic #15) SWITCH PULLER NOT INCLUDED!!! One originally came with the keychron kit, but I lost it when moving houses. PLEASE PM ME FIRST FOR ANY QUESTIONS. I would gladly provide answers to any serious inquires.

Price: 199 USD

Location: Port Saint Lucie, Florida

End Time: 2024-12-19T19:28:51.000Z

Shipping Cost: N/A USD