Cressi Bcd Regulator Octopus Dive Computer Console Scuba Full Kit Large Bcd

Description: Cressi Bcd Regulator Octopus Dive Computer Console Scuba Full Kit Included Cressi MC5 First Stage Black primary 2nd Black octo alt air 2nd Console with leonardo dive computer and pressure gauge. This is all new gear was in the pool one time for an instructor demo. Has been fully tested and tuned by a Cressi certified technician. Bcd is size Large Lightweight, yet durable Cressi Aquaride Jacket Style Elite BCD is perfect for professional divers as well as for traveling divers. It features 420-Denier high lift nylon air cell, quick doffing/donning harness system and built-in quick-release Lock Aid weight system for buoyancy compensation. The BCD comes with 2 zippered large accessory storage pockets for digital camera and backup light. With Quick-Release built-in Lock Aid weight system, the Cressi Aquaride Jacket Style Elite BCD accommodates up to 9kg/20lbs per pocket. The rigid carry handle ensures proper stability of cylinder. The cummerbund harness/elastic waistband assembly works as an exclusive suspension system to avoid instability of cylinder. The Cressi Aquaride Jacket Style Elite BCD is ideal for recreation and warm water dive. Technical Specs: 420D Nylon & Mesh Self-Draining Fabric Lock Aid Built-in Weight System Non-Releasable Back Trim Two Weight Pockets 2 Zippered Large Size Accessory Pockets Easy-to-Adjust Sternum Strap Easy-to-Adjust Torso Straps Easy-to-Adjust Cummerbund 3 x Overpressure Relief Pull Dump Valves D-Shaped Rings on Waist, Shoulder Straps & Pockets Power Inflator w-LP Hose 5 Different Sizes Available (XS-XL) Life Capacity: 10.2-25.5 kg/22.4-54.8 lbs. 1 x User Manual 1-Year Satisfaction Warranty The MC5 hyper-balanced Diaphragm Actuated 1st stage regulator has a lightweight body covered by a protective techno-polymer elastomer shell. The regulator is equipped with three low pressure and one high pressure port. Internally the 1st stage is coated with an anti-friction anti-corrosion material that reduces resistance and allows the critical components to move freely. This makes the components perform and last longer between annual servicing and increases performance. Research on internal air passages led to incorporating a special assist chamber that lower's the drop of intermediate pressure upon inhalation and has keeps this drop at a minimum, guaranteeing higher performance in any situation. Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and when experiencing low pressure in the Scuba cylinder, offering higher performance at maximum depths and during the ascent phase of the dive. The all chrome plated marine brass first stage regulator is a balanced diaphragm design which is environmentally sealed. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance. Ellipse Black 2nd stage and octo The Ellipse regulator has all the features of the new generation regulators, so it is small in size, has very moderate weight, and a modern and charming look. The performance provided is excellent and satisfies all divers, from beginners to professionals, even with its small size and traditional piston first stage. The first stageof Ellipse is the tried and testedtraditional AC2 pistonCressi model. Although this is a non-balanced first stage, it has an exceptional air flow, a lot higher than what is found on the market for this kind of first stage and that easily stands up to comparison with the balanced models in terms of performance. It comes with both international yoke or 200 or 300 bar DIN connection and boasts the exclusive feature of enabling easy and quick adjustment of the intermediate pressure. It has a generously sized cone-shaped sintered filter. This compact first stage and its legendary robustness and simplicity make it one of the most esteemed and commonly used models on the market. The second stageof the Ellipse is made from a specialnew generation high-tech polymer, which stands out due to its flexibility, mechanical strength and a capacity to absorb shocks and reduce noise that are truly original in this sector. The casing of the Ellipse hasa patented fold-out opening. With a simple 4 mm Allen wrench you can undo the cam-lock bayonet closure system to open up the casing. This operation is carried out rarely, but every now and then it is necessary so as to clean and inspect the inside and to make sure that the diaphragm and exhaust valve are intact. The diaphragm has an elliptical shape, the structure of which is patented and it is possible to use a lever of the same size or even bigger than the ones on considerably larger regulators. When you open the casing you access the regulator system which is a classic downstream side valve.The leverhas an unusual, computer-designed and patented conformation that virtually annuls the friction against the diaphragm cap, thanks to its special structure and also thanks to a completely new feature of thepoppet, also patented. In fact, instead of simply sliding longitudinally, like all poppets, this one alsotilts vertically, minimising friction against the orifice. The rectangular opening of this orifice is protected internally bya revolutionary seal made from elastomer(patented), which directs all the air towards the injector instead of allowing it to enter the casing from the opening of the orifice. Thisdrastically reduces the risk of the 2nd stage freezingin icy-cold water, and the air is completely directed towards the mouthpiece, which exalts the performance of the regulator. Another exceptional patented feature of the Ellipse, is the possibility ofextracting the entire regulator system from the casing, just by loosening a counter-screw and removing two small metal retaining cylinders. So all maintenance and calibration can be open heart, keeping times to a minimum and making these operations easier. The new structure of theexhalation valve, has made it possible to reduce breathing effort even more than the already excellent values of the Airtech. The valve works in a special trap, which protects it from a sudden flow of water that can be channelled through the exhaust tee in particular situations (jump from a boat into the water, currents, sudden movements of the head, etc). A lever that acts as aflow deflector, situated in the upper part of the casing makes it possible to adjust the Venturi effect. When it is moved to (-) position it acts as pre-dive, for water to enter and for the initial phases of the dive, and when it is moved to (+) the regulator can then develop maximum performance. A system of antagonistic counter-flows inside the casing balances depression created by the powerful Venturi effect, perfectly calibrating air flow to the divers requirements. PerformanceThe use of a lever with an unusual structure and the almost total reduction of friction have made it possible to obtain very high performance. The inhalation effort is particularly low, averaging about 5.5 Mbar, with an initial effort of almost nil. The overall breathing work is less than 1.1 joule/litre, a very good value for a regulator of this catehory. Anyone who tries the regulator in water will be amazed at the extremely easy and gentle air flow provided, and apart from the excellent values provided at the test bench, it highlights a peculiar characteristic of this regulator: how extremely pleasant it makes breathing and its incredible silence. Technical features AC2 piston 1ststageWorking pressure (INT connection)0-232 barWorking pressure (DIN connection)0-300 barCalibration pressure9.5-10 barCalibration adjustment range+/- 0.5 barAir supply2100 l/min (*)High pressure seats (HP)1Low pressure seats (LP)4 (*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders. Ellipse 2ndstageAverage inhale effort (*)5.5 mbarAverage exhale effort (*)11 mbarAverage breathing work (*)1.1 J/lAir supply1450 l/mWeight without hose166 g Leonardo dive computer The Ellipse regulator has all the features of the new generation regulators, so it is small in size, has very moderate weight, and a modern and charming look. The performance provided is excellent and satisfies all divers, from beginners to professionals, even with its small size and traditional piston first stage. The first stageof Ellipse is the tried and testedtraditional AC2 pistonCressi model. Although this is a non-balanced first stage, it has an exceptional air flow, a lot higher than what is found on the market for this kind of first stage and that easily stands up to comparison with the balanced models in terms of performance. It comes with both international yoke or 200 or 300 bar DIN connection and boasts the exclusive feature of enabling easy and quick adjustment of the intermediate pressure. It has a generously sized cone-shaped sintered filter. This compact first stage and its legendary robustness and simplicity make it one of the most esteemed and commonly used models on the market. The second stageof the Ellipse is made from a specialnew generation high-tech polymer, which stands out due to its flexibility, mechanical strength and a capacity to absorb shocks and reduce noise that are truly original in this sector. The casing of the Ellipse hasa patented fold-out opening. With a simple 4 mm Allen wrench you can undo the cam-lock bayonet closure system to open up the casing. This operation is carried out rarely, but every now and then it is necessary so as to clean and inspect the inside and to make sure that the diaphragm and exhaust valve are intact. The diaphragm has an elliptical shape, the structure of which is patented and it is possible to use a lever of the same size or even bigger than the ones on considerably larger regulators. When you open the casing you access the regulator system which is a classic downstream side valve.The leverhas an unusual, computer-designed and patented conformation that virtually annuls the friction against the diaphragm cap, thanks to its special structure and also thanks to a completely new feature of thepoppet, also patented. In fact, instead of simply sliding longitudinally, like all poppets, this one alsotilts vertically, minimising friction against the orifice. The rectangular opening of this orifice is protected internally bya revolutionary seal made from elastomer(patented), which directs all the air towards the injector instead of allowing it to enter the casing from the opening of the orifice. Thisdrastically reduces the risk of the 2nd stage freezingin icy-cold water, and the air is completely directed towards the mouthpiece, which exalts the performance of the regulator. Another exceptional patented feature of the Ellipse, is the possibility ofextracting the entire regulator system from the casing, just by loosening a counter-screw and removing two small metal retaining cylinders. So all maintenance and calibration can be open heart, keeping times to a minimum and making these operations easier. The new structure of theexhalation valve, has made it possible to reduce breathing effort even more than the already excellent values of the Airtech. The valve works in a special trap, which protects it from a sudden flow of water that can be channelled through the exhaust tee in particular situations (jump from a boat into the water, currents, sudden movements of the head, etc). A lever that acts as aflow deflector, situated in the upper part of the casing makes it possible to adjust the Venturi effect. When it is moved to (-) position it acts as pre-dive, for water to enter and for the initial phases of the dive, and when it is moved to (+) the regulator can then develop maximum performance. A system of antagonistic counter-flows inside the casing balances depression created by the powerful Venturi effect, perfectly calibrating air flow to the divers requirements. PerformanceThe use of a lever with an unusual structure and the almost total reduction of friction have made it possible to obtain very high performance. The inhalation effort is particularly low, averaging about 5.5 Mbar, with an initial effort of almost nil. The overall breathing work is less than 1.1 joule/litre, a very good value for a regulator of this catehory. Anyone who tries the regulator in water will be amazed at the extremely easy and gentle air flow provided, and apart from the excellent values provided at the test bench, it highlights a peculiar characteristic of this regulator: how extremely pleasant it makes breathing and its incredible silence. Technical features AC2 piston 1ststageWorking pressure (INT connection)0-232 barWorking pressure (DIN connection)0-300 barCalibration pressure9.5-10 barCalibration adjustment range+/- 0.5 barAir supply2100 l/min (*)High pressure seats (HP)1Low pressure seats (LP)4 (*)values measured at LP seat outlet with second stage connected and 150 bar pressure in the cylinders. Ellipse 2ndstageAverage inhale effort (*)5.5 mbarAverage exhale effort (*)11 mbarAverage breathing work (*)1.1 J/lAir supply1450 l/mWeight without hose166 g

Price: 1275 USD

Location: Saint Joseph, Missouri

End Time: 2024-11-29T14:49:14.000Z

Shipping Cost: N/A USD