Couple Disc Brakes F.I.R.s.t. Tube IN Braid 5mm Pumping 9.0mm 525187002 Bra

Description: Ebay Shop: ridewill-shoppair of first disc brakes braided hose 5mm pumping element 9.0mm 525187002 BRA Marca/Brand: BRAKING Code(s): 525187002 MPN: 525187002 Ean: 8059307532020View all products in our shopView all products of our shop DATA SHEET FIRST is the new Braking braking system, unique and completely renewed in its main characteristics, precisely the FIRST of a new era. A completely new project, 100% Made in Italy and CNC machined, the result of the experience gained on the racing fields. "FIRST" guarantees tailor-made braking thanks to the new design that will allow you to manage the ergonomics of the brake INDEPENDENTLY of the hydraulic adjustment. A dress that you can customize through the choice of various possible customizations. "TAILOR-MADE" is one of our missions: to provide a brake that is suitable for everyone, perfect for every discipline and customizable according to the different needs of each cyclist. - Braided steel hose - Lighter and more rigid pump and caliper. The pair of implants weighs 60g less than IN.CA.S 2.0 - New hydraulic adjustment system INDEPENDENT from the adjustment of the lever position - Possibility to easily change the link and therefore the reaction arm of the pump, for a braking power of up to (+26%) compared to IN.CA.S. 2.0 - New, thinner pump cartridge, with more lubrication holes and polished piston chamber for better piston sliding - Newly shaped pump tank with increased oil volume (+10%) and easy oil suction even in inverted position - New diaphragm system and pump cover for precise separation between oil and air. Avoids problems such as oil emulsions, sudden gaps in the lever, air problems after operating the lever with the bike upright, and ultimately better management of the oil volume change - Simpler caliper bleeding system - with built-in bleed nipple in the highest position, to make bleeding faster and more effective - New caliper mounting holes, for better and faster centering of the caliper on the frame - New pad pin with safety clip - Modified caliper O-ring housing geometry and tolerances, for better piston roll-back and faster oil flow - Possibility to directly install 3 mm thick discs without the need for spacers, and without dismantling the caliper - Front tube 950mm - Rear tube 1850mm INCLUDED IN THE PACKAGE: - 1 x FIRST 950mm front system - 1 x FIRST 1850mm rear system - 2 x pair of G43-A12- Sintered Race pads - Fixing screws and washers ATTENTION: Caliper with 3mm thickness can only be used at the rear, at the front possible interference with fork sliders Matchmaker for direct attachment of shifter control / telescopic seat post not included, to be purchased separately. NB: FIRST uses the same pads and hydraulic hoses as IN.CA.S. The same fittings can therefore be used for assembly. All other spare parts are not compatible! 100% MADE IN ITALY FIRST (and IN.CA.S) are the only brakes on the market to have the possibility of replacing the cartridge, changing the diameter of the pump piston to modify the braking action. - With the 9mm cartridge you have a more linear but more powerful braking action. The smaller area guarantees higher pressures in the pipes (more power), while the lower fluid flow means that a greater lever stroke is required to transfer the same volume of fluid to the caliper (greater modulation) - With the 10mm cartridge there is a more immediate braking action at the beginning of the stroke but less powerful. The greater area develops lower pressures in the pipes (less peak power), while the greater fluid flow means that the lever stroke to transfer the same volume of fluid is lower than the stroke with a 9mm cartridge (less modulable, more ON /OFF) By replacing the link, the reaction arm of the pump is modified, acting on the power of the system. There are three Link sizes available: - Short: More powerful braking action - Standard, supplied as standard: Medium powerful braking action - Long: Less powerful but more modulable braking action MAIN FEATURES / QUICK INFO:Tipo / Type : Pair / PairSKU FIRST is the new Braking braking system, unique and complete renewed in its main characteristics, precisely the FIRST of a NEW ERA . A completely new project, 100% Made in Italy and CNC machined, the result of the experience gained on the competition fields. "FIRST" guarantees customized braking thanks to the new design that will allow you to manage the ergonomics of the brake INDEPENDENTLY of the hydraulic adjustment. A dress that you can customize through the choice of various possible customizations. "TAILOR-MADE" is one of our missions: to provide a brake that is suitable for everyone, perfect for each discipline and customizable according to the different needs of each cyclist. - Braided steel tube - Lighter and stiffer master cylinder and caliper. The pair of systems has a weight of 60gr less than IN.CA.S 2.0 - New hydraulic regulation system INDEPENDENT of the lever position regulation - Possibility to easily change the link and therefore the reaction arm of the pump, for a braking power up to (+26%) compared to IN.CA.S. 2.0 - New and slimmer pump cartridge, with more holes for lubrication and polished piston chamber for better sliding of the piston - Newly shaped pump tank with increased oil volume (+10%) and easy oil suction even in inverted position - New diaphragm system and pump cover for precise separation between oil and air. Avoid problems such as oil emulsions, sudden emptying of the lever, air problems after operating the lever with the bike upright, and ultimately better management of the oil volume change - Easier caliper bleeding system - with built-in bleed nipple in the highest position, to make bleeding faster and more effective - New caliper mounting holes, for better and faster centering of the caliper on the frame - New pad pin with safety clip - Geometry and tolerances of the o-ring housings of the caliper modified, for a better roll-back of the piston and a faster oil flow - Possibility to directly install 3 mm thick discs without the need of spacers, and without disassembling the caliper - Front tube 950mm - Rear tube 1850mm INCLUDED IN THE PACKAGE: - 1 x FIRST 950mm - 1 x FIRST 1850mm - 2 x pair of G43-A12- Sintered Race pads - Fixing screws and washers ATTENTION: Caliper with 3mm thickness can only be used on the rear, on the front possible interference with fork sliders Matchmaker for direct attachment shifter / telescopic seatpost not included, to be purchased separately. NB: FIRST uses the same pads and the same hydraulic hoses of IN.CA.S. The same fittings can then be used for assembly. All other spare parts are not compatible! 100% MADE IN ITALY FIRST (and IN.CA.S) are the only brakes on the market to have the possibility of replacing the cartridge, changing the diameter of the pump piston to modify the braking action. - With the 9mm cartridge you have a more linear but more powerful braking action. The smaller area guarantees higher pressures in the pipes (more power), while the lower fluid flow means that a greater stroke of the lever is needed to transfer the same volume of fluid to the caliper (greater modulation) - With the cartridge from 10mm there is a more immediate braking action at the beginning of the stroke but less powerful. The greater area develops lower pressures in the pipes (lower peak power), while the greater fluid flow rate means that the stroke of the lever to transfer the same volume of fluid is lower than the stroke with a 9mm cartridge (less modulable, more ON /OFF) Replacing the link modifies the reaction arm of the pump by acting on the power of the system. There are three sizes of Link available: - Short: More powerful braking action - Standard, supplied as standard: Averagely powerful braking action - Long: Less powerful but more modulable braking action Gallery: WARRANTY All products sold by Ridewill are NEW and have a guarantee unless otherwise specified of: 24 months for Private individuals (Tax receipt) for defects in compliance with the law. 12 months for companies (Accompanying invoice with VAT number) in accordance with the law WARRANTY All products sold by Ridewill are NEW and have warranty unless otherwise specified: 24 months for private 12 months for Enterprises This listing was created with MarketRock. FIRST is the new Braking braking system, unique and completely renewed in its main characteristics, precisely the FIRST of a new era. A completely new project, 100% Made in Italy and CNC machined, the result of the experience gained on the racing fields. "FIRST" guarantees tailor-made braking thanks to the new design that will allow you to manage the ergonomics of the brake INDEPENDENTLY of the hydraulic adjustment. A dress that you can customize through the choice of various possible customizations. "TAILOR-MADE" is one of our missions: to provide a brake that is suitable for everyone, perfect for every discipline and customizable according to the different needs of each cyclist. FIRST is the new Braking braking system, unique and complete renewed in its main characteristics, precisely

Price: 1192.02 CAD

Location: Como

End Time: 2025-02-02T02:08:38.000Z

Shipping Cost: 40.96 CAD