Cooper Crouse Hinds Shipyard Power Supply EPC605 2042 Arktite Interlocking Plug

Description: Buyer must make arrangements for shipping. I will have it crate packaged and ready for pickup. With that being said, I have a second one of these in the exact same condition and that would help with regards to freight shipping if you needed more than one. This is a new surplus stock item that was never put into use. There are no markings on the plug receptacle or the on/off switch which shows no sign of use. It has been in a storage facility. Pictures were taken after removing wooden crate for photos. CROUSE HINDS EPC605 2042 ARKTITE EPC INTERLOCKING RECEPTACLE. 4 poles, 200 amps, 600 volts. This is from the corporate PDF pages on their site about this specific item and may contain generic information regarding different variations that are manufactured. Application: The EPC interlock receptacle is designed for use as a service outlet for portable equipment It is designed for use in damp, wet and corrosive locations, indoors or outdoors, in areas which are hazardous due to flammable vapors, gases or combustible dust. For example; refineries, chemical plants, and other processing and handling facilities of a hazardous nature Features: Mechanical interlock mechanism for dead front construction Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection A spring door receptacle, located at bottom at front of 200 ampere units, is mechanically interlocked with the circuit breaker operating mechanism for maximum safety Plug and receptacle contacts cannot be made or broken under load. The circuit breaker cannot be closed until the plug is fully inserted and the plug cannot be withdrawn unless the breaker is open Operating handles can be padlocked in either ON or OFF positions. Breakers are trip-free of the handles and will open under short circuit or overload even if the handle is locked in the ON position Quick installation and leveling is provided by the three-point mounting arrangement which has one keyhole slot at top and two open slots at bottom Bodies have four taper-tapped conduit hubs with integral bushings. Two are located at top and two directly below. Sizes are as shown in the listings. Grounding: direct connection is provided between plug and receptacle and the grounding pole. If a separate grounding wire is not installed in the enclosure, grounding is accomplished through the conduit system. Standard Materials: Bodies, covers and receptacle housings copper-free aluminum Operating handles copper-free aluminum Operating shafts stainless steel Interior parts sheet steel Insulation (receptacles and plugs) fiberglass-reinforced polyester Pressure contacts brass Crimp/solder contacts leaded red brass Standard Finishes: Copper-free aluminum natural Stainless steel natural Sheet steel electrogalvanized with chromate finish Brass natural Fiberglass-reinforced polyester natural (red) Leaded red brass electro-tin-plate Electrical Rating Ranges: Receptacle ratings: 30, 60, 100 and 200 amperes Circuit breakers: 100 and 225 ampere frame sizes Certifications and Compliances: NEC: Class I, Division 1and 2, Groups C,D Class II, Division 1and 2, Groups F,G Class III NEMA: 3,7CD,9FG,12 ANSI/UL Standard: 1010 CEC: Class I, Division 1and 2, Groups C,D Class II, Division 1and 2, Group G Class III Encl., 3,4

Price: 15300 USD

Location: Horseshoe Bend, Arkansas

End Time: 2025-02-02T22:09:21.000Z

Shipping Cost: N/A USD