Comgrow Filament Dryer Box SH02 Filament Dehydrator PTC Fast Heater and Touch Sc

Description: About this item 2 Spools Holder Filament Dehydrator: Comgrow SH02 filament dryer box is equipped with 2 filament holes which allow PTFE pipes through. The newly designed filament hole position is convenient for 3D printers with different extruder positions on the market. Large capacity of drying 2 rolls of 1KG filament at the same time meets the needs of users to dry a wide range of filaments and two printers at the same time, saving space and time. Maximum Temperature Up To 70℃: SH02 adopts 150W PTC heater which can heat up faster and are more energy-efficient. Temperature range:40-70℃.The maximum temperature is 70℃.SH02 dryer box can reach 50°C within 7 mins and reach 70°C within 25 mins. The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving your 3D printing results. A Great Fialment Storage Box: We use thicker sealing materials with stronger sealing performance and add several sealing rings around the box to keep drying. Multiple protections to prevent filaments from getting wet. One Key Set for 9 Types of Filaments: SH02 has one-key temperature setting for 9 different types of 3D Printing filaments, including PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, PP. We have set default drying temperature and time for each type of filaments in advance. Just press one key to choose the filament type and the drying box will start working as you expected immediately.The maximum drying time is 98H. Intelligent Safety Protection: When PTC temperature exceeds 130°C, it will automatically cut off the heating, and when the PTC temperature drops below 90°C, it will automatically resume heating. If the fan stops rotating during use, an alarm will sound to prompt you to replace the fan to prevent the PTC module from burning out.

Price: 69.99 USD

Location: New Jersey/Los Angeles

End Time: 2024-12-01T10:57:28.000Z

Shipping Cost: 0 USD