Clear Epoxy Resin - Bulk 32/64oz 1/2/3 Gallons Kit

Description: The resin 1:1 mix ratio by volume, kit volume is volume mixed, is the total volume32oz / 1L kit : 500ml resin A + 500ml hardener B (Total 32oz) 64oz / 2L kit : 1L resin A + 1L hardener B (Total 32oz) Bulk 128oz / 1 Gallon kit : 2X 32oz resin A + 2X 32oz hardener B (Total 1 Gallon) 2 Gallons kit: 1 Gallon resin A + 1 Gallon hardener B (Total 2 Gallons)Bulk 2 Gallons kit: 4X 32oz resin A + 4X 32oz hardener B (Total 2 Gallons)Bulk 3 Gallons kit: 6X 32oz resin A + 6X 32oz hardener B (Total 3 Gallons) Features:Mix Ratio...............1:1 by volumeWork time ..............45-60 minutesHardness....................D70-80Mixed Viscosity..........2500-3500cps.Chemical Resistance.......excellentMoisture Resistance........excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please dont leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness Perfect for tabletops, fiberglass work, small castings (under 1.2" /3CM), electrical potting, jewelry making, concrete - pebble coating, marine applications- boat building, & wood water proofing - repairs. Tips for operationThis product is 1:1 fast cure resin, each time mixed, pour No more than 150ml total, (that is 75ml A + 75ml B, A must be ≥ B), with a thickness range of ≤1.2" to avoid bursting.and you can go as deep as you like,just make sure to work in stages.stay under 1.2" per pour.after the surface film cures begin your second pour.the surface set time is roughly 1 hour at room temp.the full cure time is 8-12 hours in summer and 12-24 hours in winterthe hardness range is 70-80D after full cure Operation steps1:1 ratio for A&B glue by volume (A can be 2-5% more than B to make harder)Pour into the mixing cupStir it evenly for 2-3 minutesAdd glitter or pigmentand if you need, then stir it, standing 30-60sSlowly pour mixed resindown the moldAdd other decorative APPROVED APPLICATIONS:WOOD & METAL COATINGTABLETOPSCRAFTSJEWELRY MAKINGHOBBYIST AND CRAFT MAKINGPLAQUES AND FRAMESCONCRETE AND PEBBLE COATINGFIBERGLASS WET LAY-UPWATERPROOFING & SEALINGImportantThis chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.

Price: 18.8 USD

Location: Walnut, California

End Time: 2025-01-26T07:29:09.000Z

Shipping Cost: 0 USD