Description: Clatoon 4PCS TPMS 433MHz Tire Pressure Monitoring System Sensor, for Jeep/Chrysler/Dodge/Fiat/Ram, Replaces 56029398AA, 56029398AB, 68241067AA, 68241067AB BrandClatoonMounting TypeFlange Mount 【No Programming Required】The tire pressure monitoring system sensor has been pre-programmed specifically for your vehicle model, using the same manufacturing process as the originals, and are ready for installation. In order for your vehicle to recognize the new sensors, you will need to pair and relearn the new sensors via the OBD scan tool after replacement. 【Perfect Replacement】New upgraded 433MHz sensors. Replaceable part numbers 56029398AA, 56029398AB, 68241067AA, 68241067AB, 68464665AA. Clatoon 56029398AB TPMS Tire Pressure Sensor Frequency: 433MHzPressure Monitoring Range: 0 - 450KpaOperating Temperature: -40℉~257℉ / -40℃ ~+125℃Included Battery Model: CR2032Battery Life: 3 - 5 yearsBattery Voltage: 3.0 VPressure Reading Accuracy: ±3 kPa Please Note:1. This tire pressure sensor is pre-programmed and does not need to be reprogrammed, just triggered using the tpms scanning tool. 2. If your scanning tool or OBD diagnostic tool cannot detect that our sensor displays information such as real ID, pressure, frequency, battery status, etc., please do not attempt to start sensor replacement work. Relearn the TPMS sensor:OBDIl connector is required： 1. Put the vehicle in P gear, pull the handbrake, and properly install the tire pressure sensor.2. According to the tire label (usually on the door frame), inflate all tires to their nominal value and let stand for 5 minutes.3. Starting with the left front wheel and using the TPMS tool, activate each sensor in turn in the order of left front, right front, right rear, left rear and full size spare tire (if available).4. Turn the ignition switch to the ON position.5. Connect the TPMS tool to the OBDII interface and write the sensor ID using the OBD learning function.6. Disconnect the OBD connector.7. Turn off and then on the ignition switch.8. Road test at a speed higher than 19 mph for at least 10 minutes to ensure that the tire pressure system works normally (tire pressure light is off). OBDIl connector is not required： 1. Install the tire pressure sensor correctly.2. Inflate all tires to their nominal value according to the tire label (usually located on the door frame).3. Stop for 20 minutes. Then drive at a speed of 16-62 mph for at least 10 minutes. The tire pressure system will automatically learn the tire pressure sensor, all tire pressure warnings will disappear, and the tire pressure value will be displayed (if supported).
Price: 29.99 USD
Location: Houston, Texas
End Time: 2023-12-31T01:44:58.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Mounting Style: Screw-In
Programming Required: Yes
Items Included: Items as shown in the figure
Manufacturer Part Number: 68241067AB
Terminal Type: Ring
Material: Plastic
Superseded Part Number: 56029398AB
Item Length: 7.3cm
Vintage Part: Yes
Placement on Vehicle: Left, Right, Front, Rear
California Prop 65 Warning: No
Brand: Clatoon
Interchange Part Number: 56029398AA 68142397AA 68241067AB, 68406537AA, TPM197RA, 5S12948, 5502500
Sensor Type: Tire Pressure Monitoring Sensor
Manufacturer Warranty: Yes Warranty
OE/OEM Part Number: 56029398AB
Item Height: 2.2cm
Features: Easy Installation
Country/Region of Manufacture: China
Universal Fitment: Yes
Item Weight: 130g
Item Width: 5.8cm
Performance Part: Yes
