Description: Note: Disconnect the power to the fan before removing the old switch. Make sure to write down the position of all wires that you disconnect in the process of removing the switch. Do not cut wires from old switch, but remove by inserting blade of very small screwdriver next to wire and pulling out. Then insert the tinned wires in the same order as removed into the new switch." (If you cut the wire you will lose the stiff tinned end and make it difficult to insert into the new switch unless you strip and re-tin it again with a soldering iron)
Price: 11.85 USD
Location: Denver, Colorado
End Time: 2025-01-30T00:05:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Does not apply
Type: Does not apply
Item model number: 1
Current Rating: 10 Amps
Number of Lights: 1
Switch Type 急停开关: Material Iron
Batteries Included?: No
Operating Voltage: 16 Volts
Assembled Height: 1.2 inches
Controller Type: Pull Chain
Unit Count: 1.0 Count
Connectivity Protocol: Wi-Fi
Product Dimensions: 1.5 x 1.2 x 1.2 inches
Assembled Width: 1.2 inches
Item Dimensions LxWxH: 1.5 x 1.2 x 1.2 inches
Shade Material: Iron
Connector Type: 卷边
Item Weight: 0.317 ounces
Contact Type: 常开
Part Number: 1
Operation Mode: ON-OFF
Mounting Type Ceiling: Specification Met CSA, UL
Plug Format: A- US style
Batteries Required?: No
Assembled Length: 1.5 inches
Contact Material: Brass
