Camhi 4K 8MP 240X Zoom Auto Tracking Wifi Wireless IP Camera IMX415 SD 256GB

Description: Support Chinese, English, Francais, Deutsch ,Italiano ,Espanol ,Korean,Polski,Russia High sensitivity, high signal-to-noise CMOS image sensorUsing the MSTAR338Q processing chip+SONY IMX415 CMOSThe highest pixel is up to 8MP, and the highest resolution is up to 8MP (3840*2160)240X ZOOM(30X optical zoom and 8x digital zoomH.265 compression algorithm, effectively reducing network bandwidth, supporting dual stream, supporting mobile phone monitoringSupport humanoid recognition to trigger SD card recording, SD card capture, voice alarm, message push, email alarm and other functions.Support humanoid recognition,Support car shape recognition recording, and alarmSupport multiple network protocols: TCP/IP, HTTP, TCP, ICMP, UDP, ARP, IGMP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPNP, RTSP,etc.Support ONVIF protocol,Support for manufacturer dynamic domain name and third-party dynamic domain name resolutionSupport alarm picture sending E-MailSupport alarm picture and video upload to FTP serverSupport alarm sound outputsSupport timing capture pictures to FTP serverSupport static IP, also support dynamic IP (DHCP)Support P2P plug and playSupport IE, Google, Firefox browserSupports up to 6 users to browse at the same time (3 users per stream)Provide motion detection (area, sensitivity can be set) alarm functionSupport UPNP automatic port mappingSupport Micro SD card function, support up to 256GB Micro SD cardSupport PC client to download SD card video Support corridor mode tracking corridor mode tracking videoHow to Turn ON/OFF auto ZOOM Tracking249+Set for Turn on ZOOM Tracking249+Call for Turn off ZOOM Tracking New camera time continuous battery. Even if the camera loses power, as long as the power is reconnected, the cameras time will still be at the current correct time. JH45-S-W-240XOperating systemembedded LINUXMain processorMSTAR338QImage SensorSONY IMX415 1/2.8" Ultra Low Illumination CMOS SensorDay and night modeSupportCompression standardCompression standardVideo compression algorithm supports H.265, H.264 High Profile, H.264 Main Profile and H.264 BaselineAudio compression algorithmG.726/G.711Compressed transport stream32Kbps-6144bps, can be customized, default 1536KbpsImagesMaximum image size8MP (3840*2160)SharpnessFirst stream:4K 8MP (3840*2160) 20fps,wifi 15fps,4MP,2MP 25fpsSecond stream：800*448,640*352) can be setVideo frame rate20fps (50HZ),20fps (60HZ)Character overlaySupport OSD name,time and date information overlayImage settingsBrightness, contrast, saturation, exposure, up and down reverse, left and right mirroring adjustableNetwork FunctionStorage functionSupports up to 256G Micro SD card storage and supports scheduled video storageMotion detectionFour independent detection areas can be set (sensitivity 1-100 can be set)Alarm linkagealarm sends the picture to the specified mailbox; the alarm uploads the picture and the video is uploaded to the FTP server;Network ProtocolSupports TCP/IP, HTTP, TCP, ICMP, UDP, ARP, IGMP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPNP, RTSPAccess ProtocolSupports ONVIF 2.4 ProtocolInterfaceAudio inputsupport External MICAudio output External speakerLAN interfaceRJ45 10Base-T/100Base-TX, and 2.4G /5G WIFI/802.11b/g/n wireless connectionIR night distancesupportLEN240X ZOOM (30X Optical ZOOM (3.3-97mm ) and 8X digital zoom)waterproof levelindoorWIFI2.4G /5G WIFI/802.11b/g/n wirelessWorking temperature-40 to +85 CelsiuspowerDC12V 1AWorking Humidity-10-95% Remarks: This movement supports VISCA protocol (connected to Speed dome PTZ camera) and PTZserial port protocol (connected to PTZ). The default is VISCA protocol.Interface definition： CN11TXD1P/T to RXDVISICA96002RXD1P/T to TXD3DOME UART2-TXP/T RS232 serial port , Pelco-D,Baud rate:9600for PT rotate Bracket4DOME UART2-RXConnect IR LED board ICR port for D/Nswitch5GND6DC12VCN21TX+J11APP D/N switch2TX-3RX+2Infrared: Connect to the IPC infrared light interface4RX- Command and Instructions:1.The lens curve learning command: 253 + set + 252 +call (The distance between the camera and the object must be greater than 50meters)2.Minimum focus distance setting:Set command: 251 + set + X + call. When X = 1, the minimum focusing distance is about 1.5 meters; when X = 2, the minimum focusing distance is about 3 meters; when X = 3, the minimum focusing distance is about 6 meters; when X = 4, the focusing distance is infinity.Default X = 23. Focus mode setting:Set command: 250 + set + X + call. When X = 1, the focus will only be triggered when the zoom movement is triggered; when X = 2, any change in the pan, tilt, left, right, and zoom modes will trigger the movement to focus; when X = 3, the automatic focusing mode, In any case, the movement will automatically focus. Default X = 24. Modification Digital ZOOM: If ip address of camera is 192.168.188, Please open the browser and enter this address:http://192.168.1.88/cgi-bin/hi3510/param.cgi?cmd=setmaxezoom&-maxezoom=10 10X Digital zoom when maxezoom=10; digital zoom close when maxezoom=1 Maxezoom value can be equal to any value from 1-10, representing the multiplier digital zoom of the number. After the command is executed, please power off andrestart the camera. digital zoom to take effect5.ZOOM OSD display and not display: 225 + call + X + call, when X = 1, the ZOOM timesdisplay is on; when X = 2, the zoom timesdisplay is off, the default X =16.Modify the control protocol method (you need to restart the movement to take effect after modification): 254+set+1+set: VISCA protocol (default) (PELCO-D, baud rate: 9600, address code: 1/255) 254+set+2+set: PTZ serial port protocol (PELCO-D, baud rate: 9600, address: 17. The movement supports the standard Visca protocol with a baud rate of 9600.The address codes of the dome camera is 1 Humanoid recognition algorithm based on deep learning.Based on Huaweis deep learning humanoid recognition algorithm V2.0, itprovides accurate humanoid recognition, providing continuous humanoid coordinates for the camera and smooth tracking of the camera. Connect to the VISCA interface of the camera through the USB TTL serial port, and execute the hexadecimal code to control the camera ZOOM Connect to the VISCA interface of the camera through the USB TTL serial port, and execute the hexadecimal code to control the camera ZOOMOptical ZOOM :0x0000-0x04000 1X 240x zoom 4K 8MP wireless IP CAMERA1x cable1X wifi antenna1X Manual 1X DC12V 1A power adapter

Price: 140 CAD

Location: Shen Zhen

End Time: 2025-01-13T03:31:32.000Z

Shipping Cost: 0 CAD