Description: Fits mid-to-late 70s Bultaco with 19mm crank-end. Either single or dual sparkplug head (the coil, NOT included, determines which). Unit may also fit same years OSSA (DMR?). This spins counter-clockwise, unlike Huskys & Maicos which spin clockwise. All pieces cleaned and cleared. New black wire sheathing and electrical connectors; kill-button wire added in; already lapped to a crank-end (I highly recommend you do it again to match it to your crank-end; greatly reduces the chance of rotor spinning on crank.) The 6th picture is up through the rotor showing NO previous damage to those surfaces. I'm also including three "non-metallic" brass feeler gauges to speed up installation (put in the place while installing stator over rotor; it may take a few tries). Then verify the three gaps between magnets & pick-ups are similar in size & pulling resistance. This is a VERY important step to prevent damage from rubbing, while also yielding best signal up to coil. 250s at 2.6mm to 2.8mm BTDC.360, 370s at 2.4mm to 2.5mm BTDC. Tell me the diameter of your existing mounting screws - 4mm or 5mm - and I'll include 3 stainless allen heads. Use your existing crank nut and rubber wire grommet.What you see is what you'll get. I have already verified on an engine that this stator/rotor generates a very strong signal to a coil, either single or dual lead, and then on to a blue spark at kickover speeds. If you are going to search/buy an upper coil, get the short, 2-spade model; avoid the early long body and the single spade models (they're for point ignitions). Yes to Red or shiney Black (latest models) plugwires! Good luck finding a dual output upper coil: rare and usually pretty expensive. A rotor/flywheel-puller, should you need one, is 27x1.25mm. Those sold by seller: "Days_Extreme_Sports LLC" ( https://www.ebay.com/itm/132571397621 )are high quality, yet reasonably priced. Will ship within the lower 48 states inside the USA only.Local Pick up can be scheduled / bring folding green stuff.
Price: 105 USD
Location: Ventura, California
End Time: 2024-08-28T22:30:00.000Z
Shipping Cost: 11 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: Motoplat
Type: Stator
Country/Region of Manufacture: Spain
