Description: The resin 1:1 mix ratio by volume, kit volume is volume mixed, is the total volume Bulk 2 Gallons kit: 4X 32oz resin A + 4X 32oz hardener B (Total 2 Gallons) Mix Ratio...............1:1 by volume Work time ..............45-60 minutes Hardness....................D70-80 Mixed Viscosity..........2500-3500cps. Chemical Resistance.......excellent Moisture Resistance........excellent FDA Compliant / Food grade: Yes, in its inert fully cured state Heat resistance: up to 80℃ (please don't leave hot pans on it,a coaster needed)The resin 1:1 mix ratio by volume, kit volume is volume mixed, is the total volumeBulk 2 Gallons kit: 4X 32oz resin A + 4X 32oz hardener B (Total 2 Gallons) Features:Mix Ratio...............1:1 by volumeWork time ..............45-60 minutesHardness....................D70-80Mixed Viscosity..........2500-3500cps.Chemical Resistance.......excellentMoisture Resistance........excellentFDA Compliant / Food grade: Yes, in its inert fully cured stateHeat resistance: up to 80℃ (please don't leave hot pans on it,a coaster needed)Approximate Coverage: 12 square ft per gallon at 1/8 inch thickness Perfect for tabletops, fiberglass work, small castings (under 1.2" /3CM), electrical potting, jewelry making, concrete - pebble coating, marine applications- boat building, & wood water proofing - repairs. Tips for operationThis product is 1:1 fast cure resin, each time mixed, pour No more than 150ml total, (that is 75ml A + 75ml B, A must be ≥ B), with a thickness range of ≤1.2" to avoid bursting.and you can go as deep as you like,just make sure to work in stages. stay under 1.2" per pour. after the surface film cures begin your second pour.the surface set time is roughly 1 hour at room temp.the full cure time is 8-12 hours in summer and 12-24 hours in winterthe hardness range is 70-80D after full cure Operation steps1:1 ratio for A&B glue by volume (A can be 2-5% more than B to make harder)Pour into the mixing cupStir it evenly for 2-3 minutesAdd glitter or pigmentand if you need, then stir it, standing 30-60sSlowly pour mixed resindown the moldAdd other decorative APPROVED APPLICATIONS:WOOD & METAL COATINGTABLETOPSCRAFTSJEWELRY MAKINGHOBBYIST AND CRAFT MAKINGPLAQUES AND FRAMESCONCRETE AND PEBBLE COATINGFIBERGLASS WET LAY-UPWATERPROOFING & SEALINGImportant This chemical needs to be stored in a dry, safe, temperature controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use. When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.PaymentShipping detailsReturn policyAbout usContact usPaymentWe accept Paypal,Google Pay,VISA,Master Card,American Express and Discover.Shipping detailsWe usually ship from US within 1-3 business days with tracking number by USPS or UPS.Return policy30 days returns. Seller pays for return shipping.About usWe are a trustworthy and professional eBay seller.Contact usIf any problems about our product and service,contact us for free at any time via eBay messages.BrandFUNEPOXYColorClearHandmadeYesCapacity2 Gallons TotalFeaturesClear, Non Toxic
Price: 88 USD
Location: Hebron, Kentucky
End Time: 2025-01-08T14:14:25.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: FUNEPOXY
Color: Clear
Handmade: Yes
Capacity: 2 Gallons Total
Features: Clear, Non Toxic
