BRONSON MFG. CO. USAAF Type D-1 Jacket

Description: DescriptionThis is a replica of the 1941-1942 version of the D-1 Mechanic jacket, with a dark brown appearance, the wool is beige and slightly curly natural form, the length of the hair is 12mm-15mm, longer than the original version (the length of the original version of the hair is about 7mm-10mm), and the seams are all wrapped in dark brown vegetable tanned cow leather, and there is a slightly raised bone feeling like the "original version"; The shape of the collar is connected naturally, and the fur collar can be tightened and erected by the collar side to play a windproof role. DetailsPoint collar. Buckled throat latch debossed at top strap. Full-zip front.Long sleeves with barrel cuffs.Two front waist zipped pockets.Leather trim throughout. Unlined.Shell and hood trim: 100% shearling. Trim: 100% cow leather.Dry clean by a leather specialist. Size & FitModel is 5' 10"/ 178cm and 159lbs/ 72.5kg. He wears a size 40.Please use this info as a general guide as measurements are approximate.Shoulder to shoulder: Place the measuring tape at the corner of one shoulder and pull across to the other shoulder. This is an important measurement as some people typically wear the same size but have different shoulder widths.Chest width: Measure from the bottom of one armhole across the chest to the bottom of the opposite armhole.Length: Place the measuring tape in the middle of the collar and pull it down vertically to the bottom of the jacket.Shoulder to sleeve: Measure from the tip of the shoulder down to the bottom of the sleeveSizes can vary from 2-3 centimeters because they are measured by hand. (1 inch=2.54 cm)The size matched on a label can differ from the one you have ordered.

Price: 711.11 USD

Location: Lemont, Illinois

End Time: 2025-02-04T02:54:47.000Z

Shipping Cost: 0 USD