Description: LasertackHigh QualityFast shippingCustomer serviceBroad Range Spectrometer, Spectroscopy, 200-1200nm, 300-1000nm , made in GermanyFunctions overviewColor analysis The color space analysis option allows you to view the light source in different ways like color temperature, CRI, coordinates etc. These function gives you the ability to precisely analyze and classify light sources like LEDs.Measure only what you need Specify paramters like spectral range befor starting the measurement. It keeps the screen clean and shows only what you need. For example, take a deep view to the portion of blue light of daylight lamps or white LEDs which is harmful to the human eyes.Trigger Take advantage of several triggering options. Your can use the optical or external** triggering option. In idle mode the device doesnt take any measurement. the optical trigger causes the LR2 to start the measurement when a pre-set event occurs. The external triggering option makes it wait for a TTL pulse which may be synchonized to the pulsed light source. For optical trigger following settings are available:Wavelength and intensity level as reference Taking measurement when pre-set conditions are fulfilled (events below or above threshold) Education Use the LR2 for educational purposes. According to the measured wavelength or spectra colored curve can displayed. This way it is easy to show and explaing the correlation between the visible colors and their wavelengths.Determine the portions Let the LR2 show you and others what light consists of. LEDs or daylight lamp have a spiked spcetra instead of gaussian one like halogen lamps. This way you can easily show what wavelengths are present.Power measurement Measure the power in narrow spectral ranges or of the whole spectra taken.* Specify narrow regions where the power has to be measured. Gauss With just one click you can display the Gauss destribution and measure the line width (FWHM) of a light source.Transmission und Absorption Take accurate measurements easely and accurately. Values for filters or fluids are determined within a few seconds. Compare Take several measurements and compare them. This way you can easely compare light sources like LEDs. Applications Light source analysisAbsorptionLayer thicknessConcentration measurementReflectance fluorescence Technical details: ModelLR2-TSensorToshiba TCD1304DG Lineares CCD ArraySpectral Range200-1200nmNumber of Pixels3648Pixel Size8um x 200umPixel Depth100000 ElectronsS/N Ratio400:1 A/D Resolution16 BitFiber ConnectorSMA905Diffraction FilterincludedExposure Time10us bis 120sBuilt-in Memory64 SpectraData Transfer Time200msTriggering Options**extern via TTL (4-5V), intern, opticalPC InterfaceSupport for multi device useOSWin XP, Vista, 7, 8, 10, 32/64 BitSoftwareSpectra, Driver, LabViewHardwareSpectrometer, USB cable, fiber ComplianceCEWeight430g * Color space calculation is an option has to be chosen from the drop-dwon menu. ** external triggering is an option has to be chosen from the drop-dwon menu. Possible configurations (others available on request at no extra charge) ConfigurationSpectral rangeResolutionA300-1000nm~0,7nmB200-1200nm~1nmC560-960nm~0,4nmD300-700nm~0,4nm DeliveryLR2 SpectrometerFiberCosine correctorSoftware (Spectra, LabView examples, DLL Library)USB Stick with softwarePaymentShippingServicePaymentShippingService We accept payment via PayPal or wire. No check or credit card are accepted. The spectrometer will be shipped with ensured and trackable service.Contact us at any time when you need assistance. We are glad to help before and after your purchase.High QualityFast shippingCustomer serviceSee our other items$Lasertack High Quality Fast shipping Customer service USB Wide Band Spectrometer 200-1200nm The LR2 is a wide range spectrometer. Its features are: ---high resolution ---customized spectral range ---small size Several options below, marked with * or **, are availble for additional charge. More info at the bottom of the page! Functions overview Color analysis The color space analysis option allows you to view the light source in different ways like color temperature, CRI, coordinates etc. These function gives you the ability to precisely analyze and classify light sources like LEDs. Measure only what you need Specify paramters like spectral range befor starting the measurement. It keeps the screen clean and shows only what you need. For example, take a deep view to the portion of blue light of daylight lamps or white LEDs which is harmful to the human eyes. Trigger Take advantage of several triggering options. Your can use the optical or external** triggering option. In idle mode the device doesnt take any measurement. the optical trigger causes the LR2 to start the measurement when a pre-set event occurs. The external triggering option makes it wait for a TTL pulse which may be synchonized to the pulsed light source. For optical trigger following settings are available: ---Wavelength and intensity level as reference ---Taking measurement when pre-set conditions are fulfilled (events below or above threshold) Education Use the LR2 for educational purposes. According to the measured wavelength or spectra colored curve can displayed. This way it is easy to show and explaing the correlation between the visible colors and their wavelengths. Determine the portions Let the LR2 show you and others what light consists of. LEDs or daylight lamp have a spiked spcetra instead of gaussian one like halogen lamps. This way you can easily show what wavelengths are present. Power measurement Measure the power in narrow spectral ranges or of the whole spectra taken.* Specify narrow regions where the power has to be measured. Gauss With just one click you can display the Gauss destribution and measure the line width (FWHM) of a light source. Transmission und Absorption Take accurate measurements easely and accurately. Values for filters or fluids are determined within a few seconds. Compare Take several measurements and compare them. This way you can easely compare light sources like LEDs. Applications ---Light source analysis ---Absorption ---Layer thickness ---Concentration measurement ---Reflectance ---fluorescence Technical details: Model LR2-T Sensor Toshiba TCD1304DG Lineares CCD Array Spectral Range 200-1200nm Number of Pixels 3648 Pixel Size 8um x 200um Pixel Depth 100000 Electrons S/N Ratio 400:1 A/D Resolution 16 Bit Fiber Connector SMA905 Diffraction Filter included Exposure Time 10us bis 120s Built-in Memory 64 Spectra Data Transfer Time 200ms Triggering Options** extern via TTL (4-5V), intern, optical PC Interface Support for multi device use OS Win XP, Vista, 7, 8, 10, 32/64 Bit Software Spectra, Driver, LabView Hardware Spectrometer, USB cable, fiber Compliance CE Weight 430g * Color Space Calculation is an option available for an additional charge of 48$ ** External Triggering is an option available for an additional charge of 44$ Possible configurations (others available on request at no extra charge) Configuration Spectral range Resolution A 300-1000nm ~0,7nm B 200-1200nm ~1nm C 560-960nm ~0,4nm D 300-700nm ~0,4nm Delivery ---LR2 Spectrometer ---Fiber ---Cosine corrector ---Software (Spectra, LabView examples, DLL Library) ---USB Stick with software After your purchase, please let us know the configuration you want. Please do not pay when you want one of the additional options (Color Space or Triggering or both). Buy it only but dont pay. We will update the price and add the charge for the option. Then you can the new amount. Payment Shipping Service Imprint PaymentShippingServiceImprint We accept payment via PayPal or wire. No check or credit card are accepted. The spectrometer will be shipped with ensured and trackable service. Contact us at any time when you need assistance. We are glad to help before and after your purchase. Lasertack GmbH Wilhelmshoeher Allee 22 34117 Kassel Deutschland Fon: +49 561/70562870 Fax: +49 561/70562871 E-Mail: [info@lasertack.com] (mailto:info@lasertack.com) TAX ID.: DE305496726 VAT ID: 02623805082 HRB 16936 High Quality Fast shipping Customer service See our other items Click here to see description Lasertack USB Wide Band Spectrometer 200-1200nm The LR2 is s wide range spectrometer. Its features are: ---high resolution ---customized spectral range ---small size The full datasheet can be downloaded here: https://lasertack.com/Media/Uploaded/Spectrometer/Spektrometer_Bedienung.pdf Functions overview Color analysis The color space analysis option allows you to view the light source in different ways like color temperature, CRI, coordinates etc. These function gives you the ability to precisely analyze and classify light sources like LEDs. Transmission und Absorption Take accurate measurements easely and accurately. Values for filters or fluids are determined within a few seconds. Applications ---Light source analysis ---Absorption ---Layer thickness ---Concentration measurement ---Reflectance ---fluorescence Technical details: Model LR2-T Sensor Toshiba TCD1304DG Lineares CCD Array Spectral Range 200-1200nm Number of Pixels 3648 Pixel Size 8um x 200um Pixel Depth 100000 Electrons S/N Ratio 400:1 A/D Resolution 16 Bit Fiber Connector SMA905 Diffraction Filter included Exposure Time 10us bis 120s Built-in Memory 64 Spectra Data Transfer Time 200ms Triggering Options** extern via TTL (4-5V), intern, optical PC Interface Support for multi device use OS Win XP, Vista, 7, 8, 10, 32/64 Bit Software Spectra, Driver, LabView Hardware Spectrometer, USB cable, fiber Compliance CE Weight 430g * Color space calculation is an option has to be chosen from the drop-dwon menu. ** external triggering is an option has to be chosen from the drop-dwon menu. Possible configurations (others available on request at no extra charge) Configuration Spectral range Resolution A 300-1000nm ~0,7nm B 200-1200nm ~1nm C 560-960nm ~0,4nm D 300-700nm ~0,4nm Delivery ---LR2 Spectrometer ---Fiber ---Cosine corrector ---Software (Spectra, LabView examples, DLL Library) ---USB Stick with software Compare Take several measurements and compare them. This way you can easely compare light sources like LEDs. Gauss With just one click you can display the Gauss destribution and measure the line width (FWHM) of a light source. Power measurement Measure the power in narrow spectral ranges or of the whole spectra taken.* Specify narrow regions where the power has to be measured. Determine the portions Let the LR2 show you and others what light consists of. LEDs or daylight lamp have a spiked spcetra instead of gaussian one like halogen lamps. This way you can easily show what wavelengths are present. Education Use the LR2 for educational purposes. According to the measured wavelength or spectra colored curve can displayed. This way it is easy to show and explaing the correlation between the visible colors and their wavelengths. Trigger Take advantage of several triggering options. Your can use the optical or external** triggering option. In idle mode the device doesnt take any measurement. the optical trigger causes the LR2 to start the measurement when a pre-set event occurs. The external triggering option makes it wait for a TTL pulse which may be synchonized to the pulsed light source. For optical trigger following settings are available: ---Wavelength and intensity level as reference ---Taking measurement when pre-set conditions are fulfilled (events below or above threshold) Measure only what you need Specify paramters like spectral range befor starting the measurement. It keeps the screen clean and shows only what you need. For example, take a deep view to the portion of blue light of daylight lamps or white LEDs which is harmful to the human eyes. Payment We accept payment via PayPal or wire. No check or credit card are accepted. Shipping The spectrometer will be shipped with ensured and trackable service. Service Contact us at any time when you need assistance. We are glad to help before and after your purchase. Imprint Lasertack GmbH Wilhelmshoeher Allee 22 34117 Kassel Deutschland Fon: +49 561/70562870 Fax: +49 561/70562871 E-Mail: [info@lasertack.com] (mailto:info@lasertack.com) TAX ID.: DE305496726 VAT ID: 02623805082 HRB 16936 See our other items High Quality Fast shipping Customer service LasertackBroad Range Spectrometer, Spectroscopy, 200-1200nm, 300-1000nm , made in GermanyFunctions overviewColor analysis The color space analysis option allows you to view the light source in different ways like color temperature, CRI, coordinates etc. These function gives you the ability to precisely analyze and classify light sources like LEDs.Transmission und Absorption Take accurate measurements easely and accurately. Values for filters or fluids are determined within a few seconds. Applications Light source analysisAbsorptionLayer thicknessConcentration measurementReflectance fluorescence Technical details: ModelLR2-TSensorToshiba TCD1304DG Lineares CCD ArraySpectral Range200-1200nmNumber of Pixels3648Pixel Size8um x 200umPixel Depth100000 ElectronsS/N Ratio400:1 A/D Resolution16 BitFiber ConnectorSMA905Diffraction FilterincludedExposure Time10us bis 120sBuilt-in Memory64 SpectraData Transfer Time200msTriggering Options**extern via TTL (4-5V), intern, opticalPC InterfaceSupport for multi device useOSWin XP, Vista, 7, 8, 10, 32/64 BitSoftwareSpectra, Driver, LabViewHardwareSpectrometer, USB cable, fiber ComplianceCEWeight430g * Color space calculation is an option has to be chosen from the drop-dwon menu. ** external triggering is an option has to be chosen from the drop-dwon menu. Possible configurations (others available on request at no extra charge) ConfigurationSpectral rangeResolutionA300-1000nm~0,7nmB200-1200nm~1nmC560-960nm~0,4nmD300-700nm~0,4nm DeliveryLR2 SpectrometerFiberCosine correctorSoftware (Spectra, LabView examples, DLL Library)USB Stick with softwareCompare Take several measurements and compare them. This way you can easely compare light sources like LEDs. Gauss With just one click you can display the Gauss destribution and measure the line width (FWHM) of a light source.Power measurement Measure the power in narrow spectral ranges or of the whole spectra taken.* Specify narrow regions where the power has to be measured. Determine the portions Let the LR2 show you and others what light consists of. LEDs or daylight lamp have a spiked spcetra instead of gaussian one like halogen lamps. This way you can easily show what wavelengths are present.Education Use the LR2 for educational purposes. According to the measured wavelength or spectra colored curve can displayed. This way it is easy to show and explaing the correlation between the visible colors and their wavelengths.Trigger Take advantage of several triggering options. Your can use the optical or external** triggering option. In idle mode the device doesnt take any measurement. the optical trigger causes the LR2 to start the measurement when a pre-set event occurs. The external triggering option makes it wait for a TTL pulse which may be synchonized to the pulsed light source. For optical trigger following settings are available:Wavelength and intensity level as reference Taking measurement when pre-set conditions are fulfilled (events below or above threshold) Measure only what you need Specify paramters like spectral range befor starting the measurement. It keeps the screen clean and shows only what you need. For example, take a deep view to the portion of blue light of daylight lamps or white LEDs which is harmful to the human eyes.Payment We accept payment via PayPal or wire. No check or credit card are accepted.Shipping The spectrometer will be shipped with ensured and trackable service.ServiceContact us at any time when you need assistance. We are glad to help before and after your purchase.See our other itemsHigh QualityFast shippingCustomer service LasertackHigh QualityFast shippingCustomer serviceUSB Wide Band Spectrometer 200-1200nm The LR2 is a wide range spectrometer. Its features are:high resolutioncustomized spectral rangesmall size Several options below, marked with * or **, are availble for additional charge. More info at the bottom of the page! Functions overview Color analysis The color space analysis option allows you to view the light source in different ways like color temperature, CRI, coordinates etc. These function gives you the ability to precisely analyze and classify light sources like LEDs. Measure only what you need Specify paramters like spectral range befor starting the measurement. It keeps the screen clean and shows only what you need. For example, take a deep view to the portion of blue light of daylight lamps or white LEDs which is harmful to the human eyes. Trigger Take advantage of several triggering options. Your can use the optical or external** triggering option. In idle mode the device doesnt take any measurement. the optical trigger causes the LR2 to start the measurement when a pre-set event occurs. The external triggering option makes it wait for a TTL pulse which may be synchonized to the pulsed light source. For optical trigger following settings are available:Wavelength and intensity level as reference Taking measurement when pre-set conditions are fulfilled (events below or above threshold) Education Use the LR2 for educational purposes. According to the measured wavelength or spectra colored curve can displayed. This way it is easy to show and explaing the correlation between the visible colors and their wavelengths. Determine the portions Let the LR2 show you and others what light consists of. LEDs or daylight lamp have a spiked spcetra instead of gaussian one like halogen lamps. This way you can easily show what wavelengths are present. Power measurement Measure the power in narrow spectral ranges or of the whole spectra taken.* Specify narrow regions where the power has to be measured. Gauss With just one click you can display the Gauss destribution and measure the line width (FWHM) of a light source. Transmission und Absorption Take accurate measurements easely and accurately. Values for filters or fluids are determined within a few seconds. Compare Take several measurements and compare them. This way you can easely compare light sources like LEDs. ApplicationsLight source analysisAbsorptionLayer thicknessConcentration measurementReflectance fluorescence Technical details: ModelLR2-TSensorToshiba TCD1304DG Lineares CCD ArraySpectral Range200-1200nmNumber of Pixels3648Pixel Size8um x 200umPixel Depth100000 ElectronsS/N Ratio400:1 A/D Resolution16 BitFiber ConnectorSMA905Diffraction FilterincludedExposure Time10us bis 120sBuilt-in Memory64 SpectraData Transfer Time200msTriggering Options**extern via TTL (4-5V), intern, opticalPC InterfaceSupport for multi device useOSWin XP, Vista, 7, 8, 10, 32/64 BitSoftwareSpectra, Driver, LabViewHardwareSpectrometer, USB cable, fiber ComplianceCEWeight430g * Color Space Calculation is an option available for an additional charge of 48$ ** External Triggering is an option available for an additional charge of 44$ Possible configurations (others available on request at no extra charge)ConfigurationSpectral rangeResolutionA300-1000nm~0,7nmB200-1200nm~1nmC560-960nm~0,4nmD300-700nm~0,4nm DeliveryLR2 SpectrometerFiberCosine correctorSoftware (Spectra, LabView examples, DLL Library)USB Stick with softwareAfter your purchase, please let us know the configuration you want. Please do not pay when you want one of the additional options (Color Space or Triggering or both). Buy it only but dont pay. We will update the price and add the charge for the option. Then you can the new amount.PaymentShippingServiceImprintPaymentShippingServiceImprint We accept payment via PayPal or wire. No check or credit card are accepted. The spectrometer will be shipped with ensured and trackable service. Contact us at any time when you need assistance. We are glad to help before and after your purchase. Lasertack GmbH Wilhelmshoeher Allee 22 34117 Kassel Deutschland Fon: +49 561/70562870 Fax: +49 561/70562871 E-Mail: info@lasertack.com TAX ID.: DE305496726 VAT ID: 02623805082 HRB 16936High QualityFast shippingCustomer service See our other itemsClick here to see descriptionLasertackUSB Wide Band Spectrometer 200-1200nm The LR2 is s wide range spectrometer. Its features are:high resolutioncustomized spectral rangesmall size The full datasheet can be downloaded here: https://lasertack.com/Media/Uploaded/Spectrometer/Spektrometer_Bedienung.pdf Functions overview Color analysis The color space analysis option allows you to view the light source in different ways like color temperature, CRI, coordinates etc. These function gives you the ability to precisely analyze and classify light sources like LEDs. Transmission und Absorption Take accurate measurements easely and accurately. Values for filters or fluids are determined within a few seconds. ApplicationsLight source analysisAbsorptionLayer thicknessConcentration measurementReflectance fluorescence Technical details: ModelLR2-TSensorToshiba TCD1304DG Lineares CCD ArraySpectral Range200-1200nmNumber of Pixels3648Pixel Size8um x 200umPixel Depth100000 ElectronsS/N Ratio400:1 A/D Resolution16 BitFiber ConnectorSMA905Diffraction FilterincludedExposure Time10us bis 120sBuilt-in Memory64 SpectraData Transfer Time200msTriggering Options**extern via TTL (4-5V), intern, opticalPC InterfaceSupport for multi device useOSWin XP, Vista, 7, 8, 10, 32/64 BitSoftwareSpectra, Driver, LabViewHardwareSpectrometer, USB cable, fiber ComplianceCEWeight430g * Color space calculation is an option has to be chosen from the drop-dwon menu. ** external triggering is an option has to be chosen from the drop-dwon menu. Possible configurations (others available on request at no extra charge)ConfigurationSpectral rangeResolutionA300-1000nm~0,7nmB200-1200nm~1nmC560-960nm~0,4nmD300-700nm~0,4nm DeliveryLR2 SpectrometerFiberCosine correctorSoftware (Spectra, LabView examples, DLL Library)USB Stick with software Compare Take several measurements and compare them. This way you can easely compare light sources like LEDs. Gauss With just one click you can display the Gauss destribution and measure the line width (FWHM) of a light source. Power measurement Measure the power in narrow spectral ranges or of the whole spectra taken.* Specify narrow regions where the power has to be measured. Determine the portions Let the LR2 show you and others what light consists of. LEDs or daylight lamp have a spiked spcetra instead of gaussian one like halogen lamps. This way you can easily show what wavelengths are present. Education Use the LR2 for educational purposes. According to the measured wavelength or spectra colored curve can displayed. This way it is easy to show and explaing the correlation between the visible colors and their wavelengths. Trigger Take advantage of several triggering options. Your can use the optical or external** triggering option. In idle mode the device doesnt take any measurement. the optical trigger causes the LR2 to start the measurement when a pre-set event occurs. The external triggering option makes it wait for a TTL pulse which may be synchonized to the pulsed light source. For optical trigger following settings are available:Wavelength and intensity level as reference Taking measurement when pre-set conditions are fulfilled (events below or above threshold) Measure only what you need Specify paramters like spectral range befor starting the measurement. It keeps the screen clean and shows only what you need. For example, take a deep view to the portion of blue light of daylight lamps or white LEDs which is harmful to the human eyes.Payment We accept payment via PayPal or wire. No check or credit card are accepted.Shipping The spectrometer will be shipped with ensured and trackable service.Service Contact us at any time when you need assistance. We are glad to help before and after your purchase.Imprint Lasertack GmbH Wilhelmshoeher Allee 22 34117 Kassel Deutschland Fon: +49 561/70562870 Fax: +49 561/70562871 E-Mail: info@lasertack.com TAX ID.: DE305496726 VAT ID: 02623805082 HRB 16936 See our other itemsHigh QualityFast shippingCustomer service
Price: 1799 USD
Location: Kassel
End Time: 2024-09-08T13:39:29.000Z
Shipping Cost: 50 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Lasertack GmbH
Type: Spectroscope
Color: Clear
Model: LR2
Material: Aluminum
MPN: Does Not Apply
Country/Region of Manufacture: Germany
