Bendpak HD-9STX 9,000 Lbs Narrow Width 4-Post Lift

Description: Contact us for Delivery options (Excluding small parts): Residential or Commercial Commercial Residential (+70.00) Unloading Options I have a forklift for unloading. I Don't Have a Forklift. Please Call Me To Discuss Options Drop off at local freight terminal (+45.00) Bendpak HD-9STX 9,000-lb. Capacity Narrow Width, Extra-Tall 4 Post Lift The HD-9STX is your 9,000-lb. rugged four-post lift solution for when you need get something heavy and high, but you don't have room to spare on the sides. Perfect for vehicle storage and service in shops and garages with higher ceilings. Whether you're a service professional or a DIY'er, BendPak's got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more. More Height in Less Floor Space The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak's got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more. With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you're uncomfortable, you're more likely to make mistakes, and there's nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy. Features 9,000-lb. maximum lifting capacity. CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493. Freestanding design. Narrow-width. High-rise. Perfect for parking, storage and service. Runways accommodate narrow and standard vehicles. Runways include rail-kit for optional accessories. Electric / hydraulic power system. Single hydraulic cylinder mounted underneath runway. Fully enclosed lifting cables, safety locks and sheaves. Internal anti-sway slider blocks in each column. Oversized self-lubricating cable rollers. Features heavy-duty 3/8" aircraft cable. Rugged 1.25" roller axles. Multi-position safety locks in each column. Adjustable lock ladders. Runways feature non-skid surface. Push-button pneumatic safety release. Independent backup slack-cable safety latches. Customizable power unit location. Removable approach ramps for additional drive-under clearance. Longer approach ramps for low-ground clearance vehicles. Optional drive-thru ramps available. Optional drip trays available. Optional solid deck available to increase storage capacity. Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45). ETL Approved. Specifications Model HD-9STX Lifting capacity 9,000 lbs. / 4,082 kg Max capacity at Front Axle 4,500 lbs. / 2,041 kg Max capacity at Rear Axle 4,500 lbs. / 2,041 kg a Min. runway height 4.75 in. / 121 mm b Maximum rise 82.165 in. / 2,087 mm c Maximum lifting height 87 in. / 2,208 mm d Overall width ± .125 in. / 3 mm 100.25 in. / 2,546 mm e Outside length 198 in. / 5,028 mm f Overall length 224.50 in. / 5,703 mm g Height of post 100 in. / 2,537 mm h Distance between posts 90.236 in. / 2,292 mm i Drive-thru clearance 76.65 in. / 1,947 mm j Runway width 19 in. / 482 mm k Runway length 182.25 in. / 4,629 mm l Width between runways 34.5 in. / 879 mm m Runway centerline 56.5 in. / 1,445 mm n Outside edge of runways 75.5 in. / 1,919 mm Max. Load Operating Pressure 2,460 psi Min. wheelbase @ rated cap. 1 115 in. / 2,921 mm Min. wheelbase @ 75 capacity 1 100 in. / 2,540 mm Min. wheelbase @ 50 capacity 1 85 in. / 2,159 mm Min. wheelbase @ 25 capacity 1 70 in. / 1,778 mm Locking positions 17 spaced every 4 in. / 102 mm Motor 220 VAC, 60 Hz, 1 Ph (special voltages available upon request) 1. The Lift supports less weight than its rated capacity if the Vehicle's wheelbase is shorter; this is because the wheels are closer to the middle of the Runways, where there is less support. For example, the maximum weight allowed on the Lift for a Vehicle with a wheelbase of 85 in. is 50 percent of the Lift's rated capacity (or 4,500 lbs. when the rated capacity is 9,000 lbs.). * Specifications subject to change without notice. Downloads Manual **Bendpak charges taxes to California** ***It is the buyer's responsibility to unload the freight at their location.

Price: 5481 USD

Location: Dover, Delaware

End Time: 2025-01-07T16:40:14.000Z

Shipping Cost: 0 USD