Beluga 1652 In-Ground and Above Ground Swimming Pool Solar Heater

Description: Beluga 1652 In-Ground and Above Ground Swimming Pool Solar Heater Item Number: 388149 The unique Beluga Solar Heater is the small pool heater that makes a whale of a difference! Use the sun's rays and your backyard hose to raise the temperature of your swimming pool water. It is easy to set up and even easier to use. Installation Requirements: Circulation pump 1½" threaded connector at water inlet to pool Garden hose (black rubber hoses work best) Sun Instructions: Turn the pool pump off Screw the device into the pool inlet Attach a garden hose to the outlet at the top of the device Lay the hose in a sunny area Place the discharge end of the hose over the pool Turn the pump back on Adjust the cap on the face of the device towards a closed position to force water into the garden hose. You may need to aggressively close the cap to fill the garden hose Once water is flowing from the opposite end of the hose, adjust the flow to approximately a ½" diameter or smaller stream Tips: The longer the water is in the hose, the warmer the water will be when it exits To increase the temperature of water entering the pool, use the longest hose that your space allows To reduce heating time, adjust the water flow to maximize the size of the stream at the time of day when the temperature is the hottest Works at its best when used along with a solar cover Warnings: Always make sure the discharge end of the hose is located securely over the pool To avoid damage or injury, remove the device when the pool is in use Please do not use the device to lift water more than 5' from the pool inlet To prevent damage consult your pump manual before installing the Beluga device

Price: 48.99 USD

Location: Tonawanda, New York

End Time: 2024-08-24T12:09:28.000Z

Shipping Cost: 0 USD