BD15H DC Compressor Condensing Unit Car Refrigerator Refrigeration Unit 12V/24V

Description: Description Compressor parameters: Compressor model: BD25H Rated voltage frequency: 12-24V (DC) Working Back Pressure: Low Back Pressure (L.B.P) Cooling status: natural cooling / air-cooled Throttling device: capillary tube Motor type: BLDC Ambient temperature : 0～43℃ Evaporating temperature : -35～-10℃ Operating voltage range : 9.6～17/21.3～31.5V Max. exhaust pressure : 1.86 MPa(abs) Max. condensing temperature : 65℃ Max. winding temperature : 130℃ Max. case temperature : 95℃ Max. exhaust temperature : 120℃ Starting performance : 12/24V [0.5/0.5MPa(abs) Minimum case pressure: 35 bar Oil type: Ester oil Oil filling volume : 150ml±10ml Diameter of suction pipe (inner diameter) : Φ6.2±0.1 mm Exhaust pipe diameter (inner diameter) : Φ5.0±0.1 mm Process pipe diameter (inner diameter): Φ6.2±0.1 mm Compressor noise : ≤40dB(A) Vibration : 0.6m/s²。 Working volume:2.5cm³ Cooling Capacity: RPM is 2000, cooling capacity is 45W , 38.7 Kcal/h ,153.5 btu/h,Efficiency COP is 1.25 w/w,electric current is 2.9/1.4，input Power is 36W RPM is 2500, cooling capacity is 55W , 47.3 Kcal/h ,187.7 btu/h,Efficiency COP is 1.25 w/w,electric current is 3.5/1.7,input Power is 44W RPM is 3000, cooling capacity is 64W , 55 Kcal/h ,218.4 btu/h,Efficiency COP is 1.25 w/w,electric current is 4.1/2.0, input Power is 51W RPM is 3500, cooling capacity is 74W , 63.6 Kcal/h ,252.5 btu/h,Efficiency COP is 1.25 w/w,electric current is 4.9/2.4, input Power is 59W Digital Thermostat Parameters: Voltage range: DC 12-24V, limit 35V Operating current: 0.1A Door Lamp Function: Door lamp voltage follows input voltage Temperature probe accuracy: ±1℃ Operating ambient temperature: -10℃～60℃, relative humidity 20%～90% Features The controller automatically adapts to dual voltage, i.e. DC 12V and 24V power input systems. The maximum input voltage is 17V for DC 12V systems and 31.5V for 24V systems.The operating temperature of the controller is not greater than 50°C; when the temperature of the controller case is too high, the compressor will be stopped and over-temperature protection will be generated.Installation: Insert the three-phase output plug of the controller tightly into the terminal of the compressor, and tighten the screws after the controller is set into the mounting card of the compressor.Temperature switch: The temperature switch is connected to the C and T terminals of the controller. If no resistor is connected in between, the compressor will run at 2000rpm when the temperature switch is closed.External Fan: A 12V DC fan can be connected between the terminals (F+) and (F-) of the controller, the positive terminal of the fan is connected to the (F+) terminal of the controller and the negative terminal is connected to the (F-) terminal of the controller. The output between terminals (F+) and (F-) will always remain at 12V when the input voltage to the controller exceeds 12V. The fan must be a 12V DC fan regardless of whether the input voltage system is 12V or 24V. Package includes Packing List:1 x Compressor1×Temperature controller Payment 1. All payments must be prepaid. 2. We only accept payment which are accepted by eBay. Please kindly check if you can do the payment which are accepted by eBay. Before placing an order,Payment must be received within 7 days after order is made. Return Policy 1. We offer 30 days money back guarantee return policy. 2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part. 3. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item. About Delivery 1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address. 2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.) NOTE：Shipping: The item will be shipped from our US warehouse to United States, which is more faster than from aboard. 2-7 working days to:USA 4-10 working days to:Canada it may take a bit longer time, due to local dispatches , Customs checking, High Season period, eg. x'mas or other reasons. Your patience is always appreciated 2-7 working days to: USA 4-10 working days to: Canada 12-20 working days to: Other countries Compressor parameters: Compressor model: BD25H Rated voltage frequency: 12-24V (DC) Working Back Pressure: Low Back Pressure (L.B.P) Cooling status: natural cooling / air-cooled Throttling device: capillary tube Motor type: BLDC Ambient temperature : 0～43℃ Evaporating temperature : -35～-10℃ Operating voltage range : 9.6～17/21.3～31.5V Max. exhaust pressure : 1.86 MPa(abs) Max. condensing temperature : 65℃ Max. winding temperature : 130℃ Max. case temperature : 95℃ Max. exhaust temperature : 120℃ Starting performance : 12/24V [0.5/0.5MPa(abs) Minimum case pressure: 35 bar Oil type: Ester oil

Price: 235.11 USD

Location: Los Angeles, New Jersey

End Time: 2024-12-15T08:06:25.000Z

Shipping Cost: 0 USD