Description: The lugs in this listing include a solder slug pellet for each lug ordered. The pre-measured rosin core solder allows you an alternative to crimping. You choose the wire size, the bolt size and the quantity that you need. We also have the CL-Flux which is recommended to aid in the cable soldering available in our store as well. A few drops on the cable strands before inserting into the melted solder really help the solder to flow around the strands and form a nice bond. Heavy Duty Seamless Copper Starter Lugs combine pure copper construction with a seamless pad to provide the ultimate performance in strength, conductivity and corrosion resistance. The lug design and features a flared and chamfered barrel to facilitate cable insertion. These lugs are sized and designed to work with flexibly stranded copper wire and cable such as welding cable, marine battery cable, UL Listed battery cables, SAE battery cables, entertainment cable, diesel locomotive cable, and other similar flexible cables. UL Listed/CSA Certified Pure Copper - 99.9% Conductive ETP Copper Tin Plated to Resist Corrosion Various Sizes available You choose the size and package quantityCan be crimped or soldered (solder pellets are included with your order in this listing!) The hole sizes on the lugs are sized to fit the bolt of the same size so a 5/16 hole lug will fit a 5/16 inch bolt etc. The 5/16 lugs will also fit M8 metric as will the 3/8 lugs fit the M10 size metric bolts. Also keep in mind the sizes of cables go from smaller to larger as so: 18 AWG Smaller 16 AWG 12 AWG 10 AWG 8 AWG 6 AWG 4 AWG 2 AWG 1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG Larger A side note about copper clad aluminum cable some of you are using...If you are using cheap CCA wire (copper clad aluminum) the sizes of that aluminum cable will be larger than copper since aluminum can't carry the same current as copper and therefor the cable size they use, while the same in name, will be larger than the copper awg size and will likely not fit in the same size lug. You'll need a size or maybe 2 larger...just ask us and we can help you figure it out. Again, these quality lugs are designed to be used on quality copper wire only. SOLDER PELLET INSTALLATION INSTRUCTIONS1. Using the proper sized cable, measure the amount of insulation to be stripped by placing the cable next to thelength of the barrel. Mark the cable with your thumb at the point where it meets the end of the open barrel.2. Strip the cable using a cable stripping device. After removing the insulation, check by inserting the cableinto the barrel to make sure the insulation is snug against the top of the barrel.3. Next, secure the battery terminal in a vise. Make sure that the offset portion of the barrel is facing you.4. Place the proper solder pellet into the barrel of the terminal.5. Slide the heat shrinkable tubing over the cable.6. Apply several drops of the liquid flux to the exposed wire strands.7. Pre-heat the solder and terminal with a propane torch according to the Preheating Time Table.Make sure that you are heating the offset portion of the terminal barrel.8. After pre-heating, carefully insert the exposed cable into the barrel of the terminal and continue to heat.9. As the solder melts, allow the exposed wire strands to sink into the terminal until the insulation is snugagainst the top of the barrel.10. Slide the heat shrinkable tubing over the connection and apply indirect heat to the tubing.11. When the tubing has fully recovered, remove the heat source and allow the connection to cool.Preheating Time TablePart# Time(sec)CL-6 0:06CL-4 0:06CL-2 0:09CL-1 0:15CL-0 0:11CL-00 0:13CL-000 0:15CL-0000 0:30
Price: 1.13 USD
Location: Louisville, Kentucky
End Time: 2024-08-03T04:41:14.000Z
Shipping Cost: 3.97 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Compatible Mounting Type: Wire
Compatible Wire Gauge (AWG): 00 (2/0), 0 (1/0), 2, 4, 6
Connector Style: Ring
Type: Crimp Connector
Body Material: Copper
Contact Material: Copper
MPN: LUGS-WS
Brand: Battery Cables USA
Termination Type: Crimp or Solder
Available Variations
Color: 6 Gague AWG
Price: 1.13 USD
Available Quantity: 629
Quantity Sold: 535
Color: 6 Gague AWG
Price: 1.13 USD
Available Quantity: 2235
Quantity Sold: 2142
Color: 6 Gague AWG
Price: 1.13 USD
Available Quantity: 1607
Quantity Sold: 1507
Color: 4 Gauge AWG
Price: 1.45 USD
Available Quantity: 652
Quantity Sold: 552
Color: 4 Gauge AWG
Price: 1.45 USD
Available Quantity: 3351
Quantity Sold: 3259
Color: 4 Gauge AWG
Price: 1.45 USD
Available Quantity: 3101
Quantity Sold: 3013
Color: 2 Gauge AWG
Price: 2.37 USD
Available Quantity: 2949
Quantity Sold: 2851
Color: 2 Gauge AWG
Price: 2.37 USD
Available Quantity: 3742
Quantity Sold: 3654
Color: 1/0 Gauge AWG
Price: 2.9 USD
Available Quantity: 1900
Quantity Sold: 1809
Color: 1/0 Gauge AWG
Price: 2.9 USD
Available Quantity: 2755
Quantity Sold: 2661
Color: 2/0 Gauge AWG
Price: 4.36 USD
Available Quantity: 1772
Quantity Sold: 1672
Color: 2/0 Gauge AWG
Price: 4.36 USD
Available Quantity: 2943
Quantity Sold: 2851
Color: 6 Gague AWG
Price: 1.13 USD
Available Quantity: 484
Quantity Sold: 386
Color: 6 Gague AWG
Price: 1.43 USD
Available Quantity: 148
Quantity Sold: 48
Color: 4 Gauge AWG
Price: 1.45 USD
Available Quantity: 408
Quantity Sold: 310
Color: 4 Gauge AWG
Price: 1.75 USD
Available Quantity: 209
Quantity Sold: 109
Color: 2 Gauge AWG
Price: 2.37 USD
Available Quantity: 303
Quantity Sold: 203
Color: 2 Gauge AWG
Price: 2.67 USD
Available Quantity: 203
Quantity Sold: 103
Color: 1/0 Gauge AWG
Price: 2.9 USD
Available Quantity: 161
Quantity Sold: 67
Color: 1/0 Gauge AWG
Price: 2.9 USD
Available Quantity: 186
Quantity Sold: 86
Color: 2/0 Gauge AWG
Price: 4.36 USD
Available Quantity: 136
Quantity Sold: 40
Color: 2/0 Gauge AWG
Price: 4.36 USD
Available Quantity: 152
Quantity Sold: 52
