La Milano

Band Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band Saws

Description: Hello Folks! I have a new RCDM ORIGINAL product to offer for the DeWalt DCS371 20V and DCS370 18V cordless band saws (BAND SAW NOT INCLUDED). If you own one of these beautiful band saws you know how useful it would be if you could stand it up and cut small material without having to hold the saw. I now have a solution that fits the bill perfectly! The RCDM band saw table and stand is the perfect fit for your DeWalt DCS371 or DCS370 (BAND SAW NOT INCLUDED) which converts your DeWalt band saw into a potable vertical band saw. This table and stand DOES NOT work with the DeWalt DCS374 band saw.This kit was designed for the DCS371 and DCS370 band saws ONLY.It WILL NOT fit any other make or model of saw. The RCDM band saw table and stand features a strong 3D printed PETG thermoplastic stand which supports the saw in a vertical position and requires NO MODIFICATION to you band saw in any way. The stand simply slips over the motor housing and is held in place with with a heavy duty cable tie. Once in place the stand provides a sturdy support for the saw and even has a foot that can be screwed to a small plywood base (not included) should you need additional stability. The table consists of a two-piece sandwich design which slips over the metal work rest and is secured by six stainless steel screws to provide a 85mm x 85mm table to support small workpieces. The table is designed to be removable with the blade installed which makes it easier to convert the saw back to normal without removing the blade (you will need to remove the table to change out the blade). The trigger clip holds the trigger "on" where you don't have to hold the trigger while cutting with the saw. Just remove the battery (first) then depress the trigger safety and install the trigger clip into place (see photos). Once the clip is secured you can activate the saw by dropping the battery into it's socket. When you are done cutting you just depress the battery latch and slide the battery up to turn off the saw. The trigger clip conveniently stores on the saw's handle so you don't loose it on the shop floor (see photo). This kit also includes a blade guard that partially covers the blade slot to help prevent wandering fingertips from entering the slot (see notes below). Just press the guard into the slots of the saw frame until the guard is flush. No need to remove it for a blade change! The best part about the RCDM band saw table and stand is that the saw can be used normally (handheld) without removing the table or stand!!! Get your RCDM band saw stand and table today to enjoy all of the possibilities your DeWalt band saw can provide!!! Note: You will need a Phillips screwdriver to install the table on your band saw. Care must be taken to avoid cutting hot metals to prevent melting the table's surface. Replacement tables are available at a nominal cost should there be damage from heat. This table and stand are not intended for permanent installation on a bench top. IMPORTANT!!! The DeWalt band saw CAN AND WILL CAUSE HAND INJURY if you are not careful! Extreme caution must always be used with hand operated saws and this one is no exception!!! This auction is for one (X1) 3D printed black PETG plastic band saw stand, 1 - two-piece band saw table, 6 - stainless steel flat-head Phillips screws (+3 - spares), 1 - black cable tie, 1 - plastic trigger clip and 1 - blade guard (DeWalt band saw not included in listing). RCDM 3D printed parts are made right here in the USA on American Made FDM type printer machines. Buy with confidence as I stand behind what I offer and will do my best to handle any issues my customers may have. NOTE: We DO NOT ship outside of the 50 United States due to current international buyer scams so please do not ask for an international shipping quote. International buyers are welcome to use a freight forwarding service but do so at their own risk. Combined shipping available when you use the cart before checkout !!! Click here to check out more quality RCDM products today!!! Thank you for supporting American business and thanks for considering RCDM products!!!

Price: 25.95 USD

Location: Murfreesboro, Tennessee

End Time: 2024-07-31T03:40:32.000Z

Shipping Cost: 4.75 USD

Product Images

Band Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band SawsBand Saw Table And Stand For The DeWalt DCS371 20V or DCS370 18V Band Saws

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Country/Region of Manufacture: United States

Material: 3D Printed PETG Plastic

Type: Band Saw Table And Stand

Color: Black

MPN: RCDM302

Brand: RCDM

Recommended

RCDM Carbon Fiber PLA Front Bumper For The Axial Jeep FC Crawler Body / SCX10
RCDM Carbon Fiber PLA Front Bumper For The Axial Jeep FC Crawler Body / SCX10

$24.95

View Details
Front Left Turn Signal Light Depo 65RCDM53 for Subaru Legacy 1999 1998 1997
Front Left Turn Signal Light Depo 65RCDM53 for Subaru Legacy 1999 1998 1997

$56.78

View Details
Side Mount Remote Control for 1986 Johnson Outboard 35 J35RLCDM, J35RCDM Marine
Side Mount Remote Control for 1986 Johnson Outboard 35 J35RLCDM, J35RCDM Marine

$209.99

View Details
Rubrik R6408S APPLIANCE 4-NODE 72TB RAW SFP+ NIC RCDM INCL SUBS SERVER
Rubrik R6408S APPLIANCE 4-NODE 72TB RAW SFP+ NIC RCDM INCL SUBS SERVER

$21500.00

View Details
RCDM Side Mirrors For The Axial Jeep "Mighty" FC Rock Crawler Body / SCX10
RCDM Side Mirrors For The Axial Jeep "Mighty" FC Rock Crawler Body / SCX10

$11.95

View Details
RCDM Roof Rack For The Axial SCX10 II 2017 JK Jeep Wrangler Unlimited CRC RTR
RCDM Roof Rack For The Axial SCX10 II 2017 JK Jeep Wrangler Unlimited CRC RTR

$38.95

View Details
RCDM Siding Power Switch KIT For Lionel FasTrack O-Gauge LionChief Accessory NEW
RCDM Siding Power Switch KIT For Lionel FasTrack O-Gauge LionChief Accessory NEW

$9.95

View Details
Denon RCD-M39 CD Amplifier  player Receiver Stereo Silver Used from Japan
Denon RCD-M39 CD Amplifier player Receiver Stereo Silver Used from Japan

$152.23

View Details
Replace Remote RC-1162 for Denon CD Receiver RCDM39 RCDM39DAB RCD-M39DAB RCD-M39
Replace Remote RC-1162 for Denon CD Receiver RCDM39 RCDM39DAB RCD-M39DAB RCD-M39

$10.99

View Details
RCDM Angry Eyes 3D Carbon Fiber Grill For The Axial Jeep FC Crawler Body / SCX10
RCDM Angry Eyes 3D Carbon Fiber Grill For The Axial Jeep FC Crawler Body / SCX10

$11.95

View Details