B0388 Used Redfield 70-A 2-piece scope mount swing-off bases for Winchester 70

Description: Details: B0388 Redfield 70-A 2-piece scope mount swing-off bases for Winchester 70, with flat black finish, Front-IER means Front mounted Intermediate Eye Relief (like a scout scope), I believe these fit Winchester Model 70 bolt action rifles above serial number 66,350, must be mounted on a barrel/receiver that is drilled/tapped to mount the bases, does NOT include screws. Condition: Used in non-matching worn factory box, the edges of the swing-over round protrusion on the front base have the finish worn off from apparent use, see the photos for further details. Payment through PayPal only. Payment is due three days after the end of the auction. If there is an issue with your purchase when it arrives, please message me within three days following delivery so I have an opportunity to address the issue and make it right. Shipping via USPS Ground Advantage. US bidders only. Please check out my other listings as I will be selling thousands of other scope related items from my late uncle’s scope business soon. Thanks for viewing my listing! Definitions: 2-Piece: One base section is mounted on the forward ring portion of the receiver, while a second separate base section is mounted on the receiver behind the ejection port. Often referred to as a Redfield Senior (Sr) style. Redfield Swing-Over Rings: Similar to Weaver pivot rings but not necessarily compatible with Weaver pivot bases, one side of the base of the rings is held by a pivot point on the scope base, the other side of the base of the rings snaps over the edge of the scope base with a spring retainer, therefore, the scope can be tipped off to the side on the pivot points to use the iron sights when needed, previously called Quick-Switch by Redfield, THIS IS THE TYPE OF RINGS THAT THE LISTED BASES FIT The listed bases will NOT fit the following: Leupold style STD/Standard mounts: The forward base section accepts a dovetail style ring, which inserts and twists into place, locking it solidly into position, while the rear ring is secured by windage adjustment screws, which clamp the base of the ring on the rear base section. Redfield calls this mounting system STReamline. Standard Dovetail style mounts are meant to attach to the integral dovetail grooves machined into the top receiver of some firearms (mostly air guns and .22 caliber). Dual Dovetail style mounts are meant to pair up with Dual Dovetail rings, which twist and lock into place in the base (either a 1-piece or 2-piece base). Both the front and rear rings have the same oval style base (as opposed to STD mounts, which have a front ring with a similar dovetail bottom, but the rear ring has a different clamp base). Weaver-style mounts predate Picatinny rails. Weaver mounting rails have slots that are .180” wide and do not necessarily have a consistent spacing between the grooves. Picatinny slots are .206” wide with a center-to-center groove width of .394”. Picatinny accessories will not fit on a Weaver rail, but Weaver accessories will fit on a Picatinny rail. Quick Release style mounts: Leupold style bases that have a round hole for each ring and a lever on the side that locks in the ring. The Leupold style Quick Release rings have round slotted projections of the bottoms which fit through the round base holes and lock into place with the quick release lever. Not to be confused with Weaver style Quick Release rings (which have a cross clamp base with a knurled thumb screw that can be quickly unscrewed).

Price: 25 USD

Location: Auburn, Kansas

End Time: 2024-12-12T00:00:03.000Z

Shipping Cost: N/A USD