Autopage keyless remote starter B23AT67 XT-59 transmitter alarm PHOB start fob

Description: This item is pre-owned – it will work like new once programmed to your vehicleRemote has faded buttons and broken loops. A hole has been drilled to securely hold a keyring One (1) Aftermarket remote keyless entry fob alarm Transmitter control clicker keyfob controller replacement Functions at 100% Tested & Guaranteed Autopage FCC ID: B23AT67 Part #: XT-59 Interchangeable Part #s: MT56C XT-59 Frequency: 433 - 434 MHz LED color: Red 5 buttons Compatible with the following systems: Autopage Systems RF-305 RF-310 RF-405 RF-410 Programming Instructions: A VALET SWITCH IS REQUIRED TO COMPLETE THE PROGRAMMING INSTRUCTIONS RF-305 SYSTEM NOTE: Each step must be performed within 10 seconds of the previous step otherwise the system will exit the programming mode. 1. Enter: a. Turn the vehicles ignition to the “ON” position b. Push the valet switch 3 times. There will be 1 long chirp and 1 short chirp c. You are now ready to program the Remote Control Transmitter(s). 2. Programming the Remote Control Transmitters: a. Press any button on the first transmitter. There will be 1 short chirp. b. Within 10 seconds push any button on the second Remote Control Transmitter. There will be 2 short chirps. 3. Exit: a. Turn the vehicles ignition to the “OFF” position, Or b. Leave for 10 seconds; there will be 3 long chirps to confirm exit. Note: If more than 4 transmitters programmed, the system will only keep the last four. The Valet switch is a little Red Push Button that should be mounted under the lower left side of you dash or in the lower left kick panel near the E-brake pedal. RF-310 SYSTEM Enter: 1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15 seconds. 2. Push the Valet switch 3 times and hold in on the 3rd push, when a long chirp is heard then release the valet switch. You are now in the Transmitter programming mode. Program: 1. Press the Lock button on transmitter 1 until the siren responds on Car with a confirming chirp; the first transmitter is now programmed to Car. Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps will confirm exit. Note: If more than 4 transmitters programmed, the system will only keep the last four. The Valet switch is a little Red Push Button that should be mounted under the lower left side of you dash or in the lower left kick panel near the E-brake pedal. 100% Guarantee Remote Shipping / Return PolicyWarranty/Returns: 1. We have a 30 day return policy. 2. All returns for replacements and refund need an RMA #. 3. Please contact us before returning items so we can give you the RMA # and the proper return address. 4. No refunds / replacements will be granted without an RMA# We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged. Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement. Does this keyless remote entry come with a battery? Yes. It will have a working battery installed. Battery Condition: A. All remotes sold on Keyless4u include working batteries. B. Installed batteries are not tested for battery life- they are simply working. Some are new and some are used. Your vehicle will be installed with one of the following keyless entry systems: a. Standard Keyless Remote Packages: Installed at time of manufacture. b. Optional Keyless Remote Packages: Installed by a dealer. c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. d. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system.

Price: 59.87 USD

Location: Wellsboro, Pennsylvania

End Time: 2025-01-12T16:38:58.000Z

Shipping Cost: 6.96 USD