Auto Brake Bleeder Kit Electric Brake Fluid Pressure Bleeder Brake Oil Exchanger

Description: After being used for a period of time, automobile brake fluid will suffer from problems such as reduced boiling point, pollution, oxidative deterioration, etc., which will affect the braking performance and bring safety risks. The brake oil storage tank has a vent hole. The brake oil will absorb moisture in the air and turn into bubbles at high temperatures. When bubbles appear in the brake oil circuit, braking force will decrease or brake failure will occur. Brake fluid should generally be replaced after two years or 50,000 kilometers of use. Replace brake fluid without air bubbles The F108 brake fluid oil exchanging machine has an adjustable pressure gauge, the pressure can reach 0.5-3bar, and the flow rate is 1.5LPM. The equipment uses physical control limit switches, and no pressure will be generated when the container is empty. Since the brake fluid is directly taken out of the container with a hydraulic pump and pumped into the braking system, no brake fluid bubbles will be generated. Control Panel Simple operation with one-button starting allows a single person to easily complete the fluid exchange. It is also equipped with a pressure gauge display and the working pressure is adjustable. Wide compatibility The three new oil bottle adapters provided with F108, with sizes Ø 16 - 33 mm, Ø 23 - 41 mm, and Ø 34 - 52 mm, minimize the contact of the new oil with outside air. Equipped with a 55 mm diameter E20 brake fluid adapter connector, supporting the brake oil bottle adaptation of most European brand vehicles and a few Asian brand vehicles. It is also compatible with Dot3, Dot4, and Dot5.1 brake oil standards. Two ways to use The standard stainless steel oil bottle bracket of the F108 is used to place a 1L capacity brake oil package; the stainless steel bracket can also be removed and the equipment can be bundled with a larger capacity brake oil package using the binding straps on both sides of the fuselage, saving time and money. Notice: DOT5 cannot be mixed with DOT3 and DOT4 because the composition of the base oil is different. Specifications: WORKING VOLTAGE :AC 220V10% WORKING PRESSURE: 0.5~3.0 Bar PRODUCT WEIGHT: 2.8kg WORKING POWER: 35W FILLING HOSE LENGTH: 3m PRODUCT SIZE: 115*155*235 mm WORKING FLOW: 1.5L/Min SUCTION HOSE LENGTH:0.9m PACKING SIZE: 303 *248*246 mm Packaging List: 1.5L oil collecting pot*1Adapter Ø 16 - 33 mm*1Ø 23 - 41 mm*1Ø 34 - 52 mm*1E20 Brake Oil Pot Adapter*1Foot pad x*2

Price: 199 USD

Location: Bordentown, New Jersey

End Time: 2024-12-16T08:27:17.000Z

Shipping Cost: 0 USD