Aurora Clipper Remote-Controlled Rocket-Powered Glider Kit for Exciting

Description: Skill Level 5: Extremely ChallengingLength: 33.000" (83.82 cm)Weight: 8.500 oz (240.97 g)Fin Span: 23.000" (58.42 cm)Fin Count: 3Motor Size: 24mmRecovery System: RC GliderLaunch Pad Type: High PowerAdditional Info:Updated and Improved Design - these specs do not apply to kits purchased before August 19th, 2022Rocket Powered on the way up, RC Glider on the way back down to the groundCG location for rocket flight: 10.5" Measured forward from the trailing edge of the wing. This should be measured with a loaded rocket motor and battery installed as you would be ready to launch the modelDecals are NOT included Note: This is not a model for a novice RC pilot, but anyone who is comfortable with RC flying of a medium speed model should be fine. The Aurora Clipper RC Rocket glider kit is a sleek fast looking design that is very easy to fly. It features a low mounted delta wing with dihedral, a plastic nose cone, 1.65" white tubing for the body and depron® wing and tail surfaces. It has a light wing loading giving it a very nice glide and easy/stable boost, and the dihedral helps keep it level unless you give it a turn command. Construction is very simple and takes about an hour and a half. Wing elevons are pre-hinged and spars are pre-installed. The body tube is pre-slotted for the tail surface and rail buttons are side mounted to avoid catching on the ground during landing. You will need two 10 gram type servos, two 12"-18" servo extensions, a receiver, and a small 500mah single cell lipo battery. You will need a transmitter with delta or elevon mixing. Decals are NOT included, and can be purchased online Specs: 33" length, 23" wingspan, 8.5 oz rtf, for 24mm E-6 single use or reloadable motors.

Price: 87.14 USD

Location: Tampa, Florida

End Time: 2025-01-10T09:24:40.000Z

Shipping Cost: 0 USD