ASP Flying Model Rocket Kit Micro Jayhawk ASP KJAY-MM

Description: ASP Flying Model Rocket Kit Jayhawk Micro ASP KJAY-MMThe Jayhawk is an air-launched supersonic target drone used to simulate incoming missiles for fleet shoot-down exercises. It was manufactured by Beechcraft and first flew in the spring of 1961. This Micro kit is designed to use the Quest™ Micro Maxx™ engines and is based on our "Minimum Diameter" T-MM body tubes. Includes 3D printed nose cone, Kevlar® shock cord, full-color water-slide decals and our usual complete instructions. Due to the small parts involved, these kits are not recommended for the first-time modeler. Younger modelers should have the assistance of an adult when trying to construct these small kits. Specifications: Length: 3.75"/ 95.25mm Diameter: 0.282"/7.16 mm Approx. Weight: 0.23 oz/ 6.5 gm Skill Level: Intermediate Scale: 1/46.1 (0.0217) Recovery Device: Break-Apart Recommended Engines: Quest™ Micro Maxx™ What you'll need to build this model: Adhesives (a quick-curing epoxy glue can be used for most steps and is recommended, cyanoacrylate [“CA”] is recommended for some steps and you may also use throughout if preferred); hobby knife with a sharp #11 blade; straight edge (preferably metal); cellophane ("Scotch") tape; double-sided cellophane ("Scotch") tape; paint (Spray or bottle paint, such as such as Rust-Oleum, Krylon, or Testors is recommended. Be sure not to mix different types or brands of paint without testing.) - primer (optional), orange, black & clear (optional); sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600); pencil. Recommended, but not required: tweezers (or needle nose pliers); sanding block; tack cloth; decal setting solution such as Micro Set or Micro Sol. What else you'll need to fly this model: Electronic launch system; launch pad with Micro Maxx™ size launch rod; recovery wadding; Micro Maxx™ engines.

Price: 10.79 USD

Location: Dayton, Ohio

End Time: 2024-12-03T18:20:50.000Z

Shipping Cost: 0 USD