ASP AM3-20/1 NPE AM3-20/2 /4 Three-level power surge protector

Description: Leixun ASP AM3-20/1+NPE AM3-20/2 /4 three-level power surge protector surge protector model: AM3-20/1+NPEAM3-20/2AM3-20/4AM3-20/3+NPE The AM3-20/2 modular power surge protector is designed in accordance with IEC and GB standards. The surge protector has a strong surge discharge capacity with a discharge current of 20kA (8/20μs) per person, suitable for low-voltage power distribution systems All levels of protection.High-energy surge protectionBuilt-in instantaneous overcurrent circuit breakerRemote signal alarm interface (optional)Pluggable replacement moduleFailure detection indicationSingle module discharge current 20kA (8/20μs)Standard modular installationBuilt-in overheating circuit breakerResponse speed: 10-9 seconds levelPluggable foolproof designProduct performance parameters: Model AM3-20/2SPD port One portSPD category pressure limiting typePower system TT-TN-ITRated voltage Un 220VContinuous operating voltage Uc 385VNominal discharge current In(8/20μs) 10kADischarge current Imax(8/20μs) 20kAProtection level Up(8/20μs) <1.5kVIt is recommended to connect in series with overcurrent protection device 16A/6kAResponse time ≤25nsSize 2mods, DIN43880Failure indicator Green: normal Red: failureInstallation wire cross-sectional area 6-35mm2Installation method 35mm standard rail (EN50022/DIN46277-3)Working environment temperature -40/85℃Shell material Thermoplastic material, in line with UL94 V-0Enclosure protection grade IP20CertificationRemote signal alarm normally open/normally closed contact terminal (optional)The cross-sectional area of the remote signal terminal Maximum 1.5mm2 single stranded wire/flexible wire*The product parameters are subject to the actual product manual.The scope of products: AM3-20/2: Distribution box for important electrical equipment of buildings, such as distribution box for computer roomAM-NPE: suitable for distribution boxes and important equipment distribution boxes in 3+1/1+1 wiring mode AM3-20 1+NPE modular power surge protector is designed according to IEC and GB standards. The surge protector has a strong surge discharge capacity, with a maximum discharge current of 20kA (8 20μs) per person, suitable for low-voltage power distribution All levels of protection of the system are based on different power distribution systems (TT TN IT).High-energy surge protection Built-in instantaneous overcurrent circuit breaker remote signal alarm interface (optional) Pluggable replaceable module failure detection indication Single module maximum discharge current 20kA (8/20μs) Standard modular installation Built-in thermal circuit breaker Response speed: 10- 9-second pluggable foolproof designProduct performance parameters:Model AM3-20/1+NPESPD port One portSPD category Combination typePower system TT-TN-ITRated voltage Un 220VMaximum continuous operating voltage Uc 385VNominal discharge current In(8/20μs) 10kAMaximum discharge current Imax(8/20μs) 20kAProtection level UP(8/20μs) <1.5kVIt is recommended to connect over-current protection device 32A/10kA in seriesResponse time ≤25nsSize 2mods, DIN43880Failure indicator Green: normal Red: failureInstallation wire cross-sectional area 6-25mm2Installation method 35mm standard rail (EN50022/DIN46277-3)Working environment temperature -40/70℃Shell material: plastic, in line with UL94 V-0Enclosure protection grade IP20Certification CE RoHSRemote signal alarm normally open/normally closed contact terminal (optional)The cross-sectional area of the remote signal terminal Maximum 1.5mm2 single stranded wire/flexible wire*The product parameters are subject to the actual product manual. The AM3-20 4 modular power surge protector is designed according to IEC and GB standards. The surge protector has a strong surge discharge capacity, with a maximum discharge current of 20kA (8 20μs) per person, suitable for low-voltage power distribution systems. All levels of protection, according to different power distribution systems (TT TN IT) can choose a variety of combinations.High-energy surge protection Built-in instantaneous overcurrent circuit breaker remote signal alarm interface (optional) Pluggable replaceable module failure detection indication Single module maximum discharge current 20kA (8/20μs) Standard modular installation Built-in thermal circuit breaker Response speed: 10- 9-second pluggable foolproof designProduct performance parameters:Model AM3-20/4SPD port One portSPD category pressure limiting typePower system TT-TN-ITRated voltage Un 220VMaximum continuous operating voltage Uc 385VNominal discharge current In(8/20μs) 10kAMaximum discharge current Imax(8/20μs) 20kAProtection level UP(8/20μs) <1.5kVIt is recommended to connect in series with overcurrent protection device 16A/6kAResponse time ≤25nsSize 4mods, DIN43880Failure indicator Green: normal Red: failureInstallation wire cross-sectional area 6-25mm2Installation method 35mm standard rail (EN50022/DIN46277-3)Working environment temperature -40/85℃Shell material Thermoplastic material, in line with UL94 V-0Enclosure protection grade IP20Certification CE RoHSRemote signal alarm normally open/normally closed contact terminal (optional)The cross-sectional area of the remote signal terminal Maximum 1.5mm2 single stranded wire/flexible wire*The product parameters are subject to the actual product manual.The scope of products:AM3-20/4: Building floor distribution box AM3-20 3+NPE modular power surge protector is designed in accordance with IEC and GB standards. The surge protector has a strong surge discharge capacity, with a maximum discharge current of 20kA (8 20μs) per person, suitable for low-voltage power distribution All levels of protection of the system can choose multiple combinations according to different power distribution systems (TT TN IT).High-energy surge protection Built-in instantaneous overcurrent circuit breaker remote signal alarm interface (optional) Pluggable replaceable module failure detection indication Single module maximum discharge current 20kA (8/20μs) Standard modular installation Built-in thermal circuit breaker Response speed: 10- 9-second pluggable foolproof designProduct performance parameters:Model AM3-20/3+NPESPD port One portSPD category Combination typePower system TT-TN-ITRated voltage Un 220VMaximum continuous operating voltage Uc 385VNominal discharge current In(8/20μs) 10kAMaximum discharge current Imax(8/20μs) 20kAProtection level UP(8/20μs) <1.5kVIt is recommended to connect over-current protection device 32A/10kA in seriesResponse time ≤25nsSize 4mods, DIN43880Failure indicator Green: normal Red: failureInstallation wire cross-sectional area 6-25mm2Installation method 35mm standard rail (EN50022/DIN46277-3)Working environment temperature -40/85℃Shell material: plastic, in line with UL94 V-0Enclosure protection grade IP20Certification CE RoHSRemote signal alarm normally open/normally closed contact terminal (optional)The cross-sectional area of the remote signal terminal Maximum 1.5mm2 single stranded wire/flexible wire*The product parameters are subject to the actual product manual.The scope of products:AM3-20: Distribution boxes for important electrical equipment in buildings, such as distribution boxes for computer rooms.AM-NPE: suitable for distribution boxes and important equipment distribution boxes in 3+1/1+1 wiring mode Quantity: 1pcWarranty: 120 days

Price: 58.15 USD

Location: 深圳

End Time: 2024-12-26T08:46:05.000Z

Shipping Cost: 0 USD