Ashly KLR3200 Stereo Power Amplifier 1600W at 2 Ohm

Description: The Ashly KLR-Series amplifiers are high-efficiency, lightweight, two-channel, high power amplifiers incorporating the latest technologies delivering quality and value for professional performance at an extremely affordable price. Whether your application is professional audio or fixed performance installation, KLR amplifiers are optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 watts per channel at 2 ohms (20Hz-20kHz, 1% THD), the KLR-3200 is perfectly suited for a wide range of sound reinforcement. It's optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 ohm loads and are housed in a a uniform, rugged, 2RU chassis. Each KLR amplifier uses a state-of-the-art Switch Mode Power Supply, which assures you of flawless lows, punchy mids, and pristine highs. The output topography of the KLR-3200 is a two-step Class-H design. KLR-Series protection circuits include: output over-current protection, DC output protection, chassis internal temperature monitoring, inrush limiting, and a mains circuit breaker. Front panel features include: individual input attenuators, signal, clip, and protect LEDs, air inflow vents with removable dust filters, power switch, and power LED. Rear panel features include: balanced inputs via 3-pin Euroblock, combo XLR/ 1/4" TRS connectors, Neutrik Speakon output connectors, 3-position gain switch (32dB, 26dB, or 1V input sensitivity), 3-position mode switch (bridged, stereo, or parallel mono), 3-position HPF switch (30Hz, 50Hz, or off), on/off limiter switch, air outflow vents, and permanently attached power cord.Ashly KLR-3200 Features:Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRSSwitch mode power supply provides high efficiency and low weightForced air cooled (front in, rear out)Removable dust filtersFront mounted attenuatorsFront panel indicators for output level, clip/protect, and power on/offGain selectable switch for both channelsRack ears for permanent installation in a standard 2RU enclosureNeutrik Speakon output connectors3-position gain switch (1V, 32dB or 26dB sensitivity)3-position mode switch (bridged, stereo or parallel mono)3-position HPF switch (30Hz, 50Hz or off)On/off limiter switchPermanently attached power cordExtensive protection circuitrySafety/Compliance: cCSAus, FCC, CE, RoHSAshly KLR-3200 Specifications:Rated Power Output Per Channel(Stereo Mode, both channels driven)8 Ohms, 20 Hz - 20 kHz, 1% THD: 650W4 Ohms, 20 Hz - 20 kHz, 1% THD: 1100W2 Ohms, 20 Hz - 20 kHz, 1% THD: 1600W70V Output, 20Hz - 20kHz, 1% THD, per channel: 800WBridged Mono Mode: 4 Ohms, 20 Hz - 20 kHz, 1% THD 3200WLine Current Draw (all channels driven @4Ohms)Idle: 0.92A1/8th Power Pink Noise 11.4A1/3 Power Sine Wave 16.6AS/N (20 Hz-20 kHz, unweighted): >109dBThermal Dissipation (all channels driven @4Ohms)Idle (BTU/hr): 1361/8th Power Pink Noise (BTU/hr): 20631/3 Power Sine Wave (BTU/hr): 3001Input Gain Switch 1V, 26dB, 32dBSignal to Noise Ratio (20Hz-20kHz, rated power @ 8 Ohms unweighted): >109dBOutput Circuitry: 2 Step Class HWeight 26.4 lbs (10.9kg)Frequency Response 1W @ 8 Ohms 20Hz – 20kHz (-3dB down point): +0.3dB 5Hz – 70kHzDamping Factor – 100Hz @ rated power @8 Ohms:>380THD 20Hz-20kHz: 10dB below rated output @ 4OhmsInput Impedance: 12 kOhm, balancedHigh Pass Filter: 30Hz, 50Hz, Off (12dB/Oct)Amplifier Protection: Output Overcurrent, DC Output,Chassis Temperature, Mains BreakerCooling: Variable Speed Fan, Front-to-Rear AirFlowFront Panel Indicators: Protection/Clip, Signal,PowerAttenuators: Per Channel, Front PanelInput Connectors, each channel: 3-pin Euroblock, XLR, ¼”TRS Phone JackOutput connectors, each channel: Four-pinSpeakon-typeOperating Temperature/Humidity Temperature: -10C to +40C/ Humidity: 0% to 90%Power Cable Connector: 3-prong NEMA 5-15Dimensions: 19" W x 3.5" H x 16" D (482 x88 x 407 mm)

Price: 1249 USD

Location: Verona, Wisconsin

End Time: 2024-11-20T19:17:26.000Z

Shipping Cost: 0 USD