Description: AS5047 based digital encoder for any BLDC motors. Compatible with all VESC based motor controllers FeaturesDigital AS5047 encoder with SPI communicationCompatible with all VESC based controllers without hall sensor filter (almost all Trampa, larger Flipskys, most of VESC6 based controllers)6-pin VESC compatible connectorIntergated temperature sensor, compatible with VESCConnector for external temperature sensor, internal or external sensor selectable via a solder jumperRGB LED for easy debugging (if the motor turns the colors changing according to the rotor position)Designed to be plug-and-play in QS165, QS138 and Sotion motorsContent of the packageEncoder6x3mm axial magnet30cm cableHow to useConnect the encoder to VESCCheck if the power LED is on. Attach a magnet to the rotor, check if the color of the RGB LED changes if you rotate the rotorConnect your VESC to VESC Tool, either the mobile version or the PC version will work, however the PC version is suggested for the first setup as you can check the rotor position real-timeOn the "Motor Settings/FOC/General" tab select "Encoder" from the "Sensor Mode" dropdown menu, click "Write motor configuration" on the right side toolbarOn the "Motor Settings/General/Sensors" tab select "AS5047 Encoder" from the "Sensor Port Mode" dropdown menu, click "Write motor configuration" on the right side toolbarNow the encoder is ready to be used, you can check if it works on the "Data analysis/Realtime Data/Rotor position" tab by clicking on the "Encoder" button. Now you should see a graph on the screen showing the realtime position instead of showing the default 120 DegreesHow to set up the internal tempature sensorOn the " Motor Setting/General/Temperature" tab select "NTC 10K at 25°C", other parameters can be left defaultClick "Write motor configuration" on the right side toolbar How to set up the extrernal temperature sensorCut the default jumper trace on the PCB between the center and the left pad with a utility knifeSolder the center and the right pad together with a 0ohm resistor or with solderAttach your external temperature sensor to the temperature sensor connector
Price: 25 USD
Location: Budapest
End Time: 2025-01-31T22:05:00.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Termination Type: Connector
Sensor Type: Solid State
Encoding Type: Absolute
Output Type: Digital
Sensing Technology: Magnetic
