Aquatec CDP 6800 Booster Pump-CDP 6840-2JO3-B221 (pump/transformer options)

Description: The single greatest investment in your RO system, to improve overall performance, is a booster pump. Supply water pressure is single greatest factor in determining water production rate, RO storage tank fill rate, and brine:permeate ratio. Installation of a booster pump will improve all of the aforementioned measures of system performance. Supply water pressure 70-80 psi Increase water production rate by as much as 20-50%Improve RO tank fill rate by as much as 400%Decrease brine water to drain by as much as 80% Extend membrane life Aquatec CDP-6800 Booster Pump (Model CDP-6840-2J03-B221). Three chamber diaphragm pump, self priming, and capable of being run dry. Excellent pump for boosting supply water pressure to RO systems 24-75 GPD. The pump is a must for homes with low supply water pressure (<45 psi). The pump delivers 0.38 LPM (145 GPD) at 80 psi and 0.73 LPM (278 GPD) in the fully open position. The pump comes standard with 1/4" John Guest inlet/outlet fittings and operates on 24VAC, requiring an optional110v/60 Hz transformer and pressure switch for pump operation. The transformer may be purchased separately or as part of the pump package for a small up charge. An appropriate pressure switch can be purchased separately (eBay item number:153601698652). SPECIFICATIONS: MOTOR:TYPE: 24 VAC, Permanent Magnet,Totally Enclosed, Non-Ventilated LEADS: 20 AWG, 6” PUMP DESIGN: 3 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry Base: Vibration dampening with mounting holes TYPICAL APPLICATION: Pre-Filter Water Treatment (R.O. Boost) MATERIALS: HOUSINGS: Nylon VALVES: EPDM DIAPHRAGM: Santoprene FASTENERS: Stainless Steel LIQUID TEMPERATURE:170°F (77°C) Max. Warranty: 2 years from date of purchase Installation instructions included. Note: For 100-150 GPD RO systems, select CDP 8800 booster pump.

Price: 79.95 USD

Location: Dayton, Ohio

End Time: 2023-09-13T14:29:32.000Z

Shipping Cost: N/A USD