Aluminum Z Axis Slide 85mm Stroke Linear Actuator Kit for CNC Router 52mm Clamp

Description: Aluminum Z Axis Slide 85mm Stroke Linear Actuator Kit for CNC Router 52mm ClampAluminum Z Axis Slide 85mm Stroke Linear Actuator Kit for CNC Router 52mm Clamp DescriptionThis item is made of high-quality and hard aluminum material, which is more durable and lasts longer. It is artificially and naturally treated to resist wear and tear. The high precision of this item and design makes you work more smoothly and conveniently. You can put it to good use in your work. It can be used in CNC laser machines, engraving machines, etc. Key FeaturesWear-resistant: The filament rod of this item is made of high-quality and high-hardness aluminum material and has a very smooth surface. Therefore, it is very wear-resistant. Great Durability: This item is made of high-quality aluminum, which is more durable and has a longer service life. It is also not easy to damage or rust under proper use and is very durable. High Precision: Each part of this Z-axis stroke is carefully machined for a compact structure and high precision. Low Noise: It generates less noise than its traditional counterparts. So you don't have to worry about the noise produced during use affecting the normal life of people around you. It can create a quieter working environment for you. High-sensitivity: This rigid coupling has a very light mass and low inertia. It has very high-sensitivity when used, which can improve your work efficiency. Safe to Use: The curved edge design makes it smooth so that you don't need to be afraid of hurting your hand, which can bring great safety and reassurance. Small Size: The item is about 13.5*7*13.25cm in size and 1.7kg in weight, which is very convenient for you to carry and store. Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. DetailsWrench: This item comes with a hex wrench to help you easily install and remove screws from the Z-axis. You don't have to buy an extra wrench. Smooth Edges: This item is very well made and has very smooth edges, which will not hurt your hands. ApplicationThis Z-axis stroke with a stepping motor can be used in CNC laser machines, engraving machines, motor clamps, etc. SpecificationsMaterial: AluminumScrew: T8 Anti-loosening ScrewGuide: 4mm/0.157"Installable Laser Diameter: 40mm/1.57"Sliding Stroke: 85mm/3.35"Spindle Hole Diameter: 52mm/2.05"Gross Weight: 1.8kg/3.97 lbsProduct Weight: 1.7kg/3.75 lbsPackage Size: 25.5*19*10cm/10.04*7.48*3.94"Product Size: 13.5*7*13.25cm/5.31*2.76*5.22" Package Included1* Z-Axis Stroke With Stepping Motor1* Connection Cable1* Wrench4* Screws NotesPlease allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.Year of manufacture2023Warranty3 YearsFeaturesDurableSurface FinishMade of high quality materialModelCNC3018plusMPNDoes Not ApplyBrandUnbrandedMaterialAluminumScrewT8 Anti-loosening ScrewGuide4mm/0.157"Installable Laser Diameter40mm/1.57"Sliding Stroke85mm/3.35"Spindle Hole Diameter52mm/2.05"Gross Weight1.8kg/3.97 lbsProduct Weight1.7kg/3.75 lbsPackage Size25.5*19*10cm/10.04*7.48*3.94"Product Size13.5*7*13.25cm/5.31*2.76*5.22"On Sep 4, 2024 at 03:37:29 PDT, seller added the following information:

Price: 61.47 USD

Location: Chino, California

End Time: 2024-12-04T03:39:13.000Z

Shipping Cost: 2.01 USD