Adafruit 6-axis Accelerometer and Gyroscope, ISM330DHCX Sensor, 4502

Description: Adafruit 6-axis accelerometer and -Gyroscope, ISM330DHCX Sensor, 4502The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit ISM330DHCX 6-axis accelerometer and gyroscope, STEMMA QT / QwiicWith the ST ISM330DHCX, Adafruit delivers an industrial-grade accelerometer with an integrated gyroscope.This IMU sensor has 6 degrees of freedom - 3-axis detection of linear acceleration and angular velocity at different rates within a wide measuring range. The adjustable measuring range for the acceleration sensor is ± 2g, ± 4g, ± 8g or ± 16g at a sampling rate of 1.6Hz to 6.7kHz. For the gyroscope, the measuring range is ± 125dps, ± 250dps, ± 500dps, ± 1000dps, ± 2000dps, ± 4000dps at a rate of 12.5Hz to 6.7kHz. A measuring range of up to 4000 dps is rather the exception, many sensors are limited to 2000 dps. This sensor has additional calibration and compensation circuitry to ensure excellent performance over a wide temperature range of -40 to + 105 ° C. Most other IMU sensors do not support industrial temperature ranges and have large fluctuations in accuracy as the temperature changes. The accelerometer and the gyroscope are also on the same silicon chip, which means that the 6 measurements remain better synchronized than if the two sensors are on separate chips.There are some nice extras too, like built-in tap detection, activity detection, step counter / pedometer, and a programmable finite state machine / machine learning core that can do some basic gesture recognition.It is controlled via the SPI interface or I2C bus. The board has two configurable interrupt outputs. To make it quick and easy to get started, Adafruit placed the sensors on compact breakout boards with voltage regulation and level converters. This way you can easily use them with a voltage of 3V or 5V.Adafruit have also written libraries that allow you to integrate these sensors into your Arduino / C ++ or CircuitPython / Python cards like Raspberry Pi or other single board computers: https://learn.adafruit.com/lsm6dsox- and-ism330dhc-6-dof-imuThe board has SparkFun qwiic-compatible STEMMA QT connectors for the I2C bus, so no soldering is necessary! Just connect the board to your favorite board like that STM32F405 Feather with help of a STEMMA QT cable. This IMU sensor has 6 degrees of freedom - 3-axis detection of linear acceleration and angular velocity at different rates within a wide measuring range. The adjustable measuring range for the acceleration sensor is ± 2g, ± 4g, ± 8g or ± 16g at a sampling rate of 1.6Hz to 6.7kHz. For the gyroscope, the measuring range is ± 125dps, ± 250dps, ± 500dps, ± 1000dps, ± 2000dps, ± 4000dps at a rate of 12.5Hz to 6.7kHz. A measuring range of up to 4000 dps is rather the exception, many sensors are limited to 2000 dps. This sensor has additional calibration and compensation circuitry to ensure excellent performance over a wide temperature range of -40 to + 105 ° C. Most other IMU sensors do not support industrial temperature ranges and have large fluctuations in accuracy as the temperature changes. Marke Adafruit EAN Nicht zutreffend Modell Adafruit ISM330DHCX - 6 DoF IMU - Accelerometer Herstellernummer 4502 Geeignet für Arduino Platinen Herstellungsland und -region Vereinigte Staaten Produktart Sensor

Price: 28.22 USD

Location: Berlin

End Time: 2024-11-20T19:59:49.000Z

Shipping Cost: 7.52 USD