Description: Clean Injection CI1300 Series 1300cc Fuel Injectors with plug and play adapters to K24 Engines Looking to upgrade injectors without breaking the bank? Listing is for a set of CI1300 Series 1300cc fuel injectors to suit HONDA K24 engines. Perfect for the budget builder looking for rock solid reliability and superb performance for an excellent price. Injectors are covered under our 2 year unlimited mile warranty. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW. Injectors are high impedance so no resistor box/injector drivers necessary. Listing includes plug and play injector adapters to allow the injectors to plug right into the factory injector harness. No cutting or soldering wires necessary. The injectors are compatible with all known fuels including e85. The injectors retains a consistent linear flow from 3bar to 7 bar fuel pressure. Very tuner friendly with fuel trimming down to 1.1ms. The injectors will support over 300whp with correct tuning and fuel type. The injectors utilize a 4 hole disc mist spray pattern with excellent fuel atomization resulting in superb idle conditions. Injectors are dynamically and statically flow tested on the industry leading ASNU Classic test equipment. They are then sealed and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data for easy tuning. Clean Injection Fuel Injectors are built to stringent OE requirements that offer identical factory fit for easy installation. They deliver an accurate, tightly controlled fuel spray pattern that allows for more efficient vaporization. Clean Injection Fuel Injectors feature internal seal rings protected from fuel exposure for longer life and improved sealing materials to provide cold sealing to -40°C for better cold starts. Plus, injectors are manufactured using components and seals that aren't sensitive to different fuel or fuel blends, including ethanol mixtures. Delphi Fuel Injectors also provide optimal performance thanks to extra fuel filtering protection to eliminate contaminants. INJECTOR FEATURES:Flow Matched Sets within ≤ 1% Static and Dynamic flow ratesFull Injector Latency Data ProvidedTunable to factory Rock solid IdleExcellent Fuel AtomizationDirect Plug and Play FitFast Response timeConsistent performance all the way to 100psi+ Fuel Pressures2 Year Unlimited Mile WarrantyStainless Steel Internals Compatible with all known race fuels including E85 Honda/Acura fitment guide:Acura5 vehicles3 vehicles2013 - 2015ILX Base L4 - 2.4L 2354cc type K24Z7 - MFI GAS DOHC1 vehicles2013TSX Base L4 - 2.4L 2354cc type K24Z3 - MFI GAS DOHC1 vehicles2013TSX Special Edition L4 - 2.4L 2354cc type K24Z3 - MFI GAS DOHCHonda39 vehicles5 vehicles2008 - 2012Accord EX L4 - 2.4L 2354cc type K24Z3 - MFI GAS DOHC5 vehicles2008 - 2012Accord EX-L L4 - 2.4L 2354cc type K24Z3 - MFI GAS DOHC5 vehicles2008 - 2012Accord LX L4 - 2.4L 2354cc type K24Z2 - MFI GAS DOHC1 vehicles2008Accord LX L4 - 2.4L 2354cc type K24Z3 - MFI GAS DOHC5 vehicles2008 - 2012Accord LX-P L4 - 2.4L 2354cc type K24Z2 - MFI GAS DOHC5 vehicles2008 - 2012Accord LX-S L4 - 2.4L 2354cc type K24Z3 - MFI GAS DOHC2 vehicles2011 - 2012Accord SE L4 - 2.4L 2354cc type K24Z2 - MFI GAS DOHC2 vehicles2010 - 2011CR-V EX L4 - 2.4L 2354cc type K24Z6 - MFI GAS DOHC2 vehicles2010 - 2011CR-V EX-L L4 - 2.4L 2354cc type K24Z6 - MFI GAS DOHC2 vehicles2010 - 2011CR-V LX L4 - 2.4L 2354cc type K24Z6 - MFI GAS DOHC1 vehicles2011CR-V SE L4 - 2.4L 2354cc type K24Z6 - MFI GAS DOHC4 vehicles2012 - 2015Civic SI L4 - 2.4L 2354cc type K24Z7 - MFI GAS DOHC INJECTOR SPECS: Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 1300cc/miCoil Resistance: 12.2 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers) Spray Pattern: 30 degree mist (4 hole orifice) Electrical Connector: USCAR Fitted with Viton o-rings Includes lower to injector seal. LISTING INCLUDE:4pcs 1300cc fuel injectors4pcs plug and play injector connector adapters SHIPPING:Shipping within the U.S is free. Orders are shipped within 24 hours of cleared payment. WARRANTY:Product is covered with our 2 year unlimited mile warranty. Warranty will cover mechanic errors only. Warranty does not apply to damage caused by user error, alterations, or improper installation. CUSTOMER SERVICE:Customer service is the experience we deliver to our customer. It's the promise we keep to our customers. It's how we follow through for our customers. It's how we make them feel when they do business with us. If you have any issues whatsoever please feel free to contact us and we will take care of any issues or questions you may have.
Price: 299.99 USD
Location: Acworth, Georgia
End Time: 2024-01-31T23:19:13.000Z
Shipping Cost: 30.45 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Clean Injection Delphi
OE Spec or Performance/Custom: Performance/Custom
Non-Domestic Product: No
Interchange Part Number: 650cc 750cc 850cc 450cc 440cc 550cc 310cc 900cc
Manufacturer Warranty: Yes
Part Brand: Siemens Deka Sard HKS Denso Bosch
Custom Bundle: No
Manufacturer Part Number: K series K24Z3 410cc dohc Vtec iVtec 2.4l EX rdx
Country of Manufacture: United States
Surface Finish: Black
Country/Region of Manufacture: United States
Modified Item: No