8 FOOT TALL ALUMINUM PIPE AND DRAPE VERTICAL UPRIGHT WITH SLOTS AT TOP & 3 FEET

Description: 8 Foot Upright for Pipe And Drape Kits! What's Included In The Listing:One 8 foot high (96"H) upright. Listing is for the upright only. Additional hardware sold separately in our eBay store. About The Upright:This durable aluminum upright sets the height of your pipe and drape display, and is the vertical piece of pipe that is located at each end of a horizontal drape support rod. The height is fixed at 8 feet (or 96") tall, and the diameter is 1.5". This is a Slip-Fit upright, as it is hollow and is meant to be placed on top of a pin that is screwed on to a base (base and pin sold separately). There are 4 slots cut out at 90 degree angles at the top of the upright, and again at 3 feet high (the 3 foot cut outs are used if making traditional trade show booths with an 8 foot tall back wall and 3 foot tall side walls). These slots act as the entrance point for the hooks in our drape support rods to go in to. Because there are 4 slots, you can create a variety of display set-ups; in-line/linear, "L shaped", "T shaped", open ended boxes, and fully enclosed boxes. The photo shown has an example of an "inline" set-up, where the upright serves as the "middle point" of two horizontal drape support rods, allowing the display to be wider and continue in a linear span. NOTE: Each end of a horizontal drape support rod will ALWAYS need an upright to hold it up. So, in the photo shown, there would also be an upright (not seen) on the left and on the right. NOTE: If also purchasing a base from us (base sold separately), the recommended size and weight for this 8 foot tall upright is our 16" x 14" base that weighs 10 lbs. An upright must ALWAYS have a base underneath to support it. IMPORTANT: Use of products are intended for indoor, decorative use only. They should never be used where tip-over may cause injury or damage. Failure to use these products as intended will likely affect the safety of the products used and can result in injury or damage for which we are not responsible. Any box that is delivered, or component piece within a box, may be sharp, and should be handled with care. Additional Information: We answer any and all questions as quickly as possible. Our staff is available to assist you Monday - Friday from 9:00 am to 5:00 pm EST. We also sell all component pieces separately if an entire kit is not needed. Please contact us for more information.

Price: 22.99 USD

Location: Marietta, Georgia

End Time: 2025-01-17T19:35:15.000Z

Shipping Cost: 17.99 USD