7mm 15mm ALLOY WHEEL SPACERS + BLACK BOLTS & LOCKS FOR PORSCHE 911 LUG NUT WIDE

Description: Suitable for all later Porsche 911 models (996, 997, 991, 992).NOTE: Some special edition models, may already have 5mm spacers fitted from the factory which will have to be removed before fitting this kit. Not suitable for use with 'centre lock' wheels. Features...A full spacer kit including extra-long black bolts and locksThatcham approved locks - high security locksAll bolts have 'floating' radius washer (correct for OE Porsche wheels)No wheel vibrations (unlike cheap spacers)Correct 170mm outer diameter to perfectly match Porsche hubsNOT to be confused with cheap kits! This kit includes... 2 x 15mm hub-centric spacers for rear wheels2 x 7mm hub-centric spacers for front wheels8 x Black non-locking bolts for use with 7mm spacers8 x Black non-locking bolts for use with 15mm spacers2 x Black locking wheel bolts for use with 7mm spacers2 x Black locking wheel bolts for use with 15mm spacers 1 x Key adaptor to fit all four locks1 x Fitting guide / instructions This is everything you need to space your front and rear wheels. This combination of 7mm at the front and 15mm at the rear is the perfect, most proven set-up on Porsches. IMPORTANT: You must check wheel arch clearance before ordering. The spacers Two 15mm wheel spacers are included in this kit. These should NOT be confused with cheap universal items! They are precision machined from billet aluminium and designed for a perfect hub-centric fit. They are perfectly balanced and so will not disturb the vehicles wheel balancing. They are machined from billet aluminium - not cheap cast aluminium and are clear anodised for long lasting corrosion protection. The non-locking bolts This kit includes Porsche style extended length black wheel bolts. They feature the 'captive' (freely rotating) washers and 'radius' seats that you would find on an OE Porsche wheel bolt. These bolts are far superior to ordinary 'compatible' bolts. They feature a dished top design and the correct 19mm hex head as found on original Porsche bolts. The Locking bolts Specially designed for use with Porsches when 7mm spacers have been fitted to the front and 15mm to the rear. The outer ring is free to rotate without unthreading the bolt. This means the bolt cannot be gripped without the key - an excellent security device! The bolts are made from heat treated carbon alloy steel and are drill and punch resistant. They are Thatcham tested and approved and are manufactured to ISO9001 & QS9000 standards. Each locking set is supplied with a unique key code (found on a sticker inside the box). This should be kept in a safe place and if the key were ever lost a replacement can be purchased. Note: The key profile design shown in the picture will vary from one set to the next - every set is different! Check clearancesPlease measure the space available inside the arch lip and with respect to other suspension components BEFORE ORDERING. THIS PART IS THE BUYERS RESPONSIBILITY! Fitment list... Porsche 911 (996) (1997 - 2005) Porsche 911 (997) (2005 - 2012) Porsche 911 (991) (2012 - 2016)Porsche 911 (992) (2016 +) Porsche Boxster (986) (1996 - 2004) Porsche Boxster (987) (2004 - 2012) Porsche Boxster (981) (2012 - 2016)Porsche Boxster 718 (982) (2016 +) Porsche Cayman (987C) (2005 - 2012) Porsche Cayman (981C) (2012 - 2016)Porsche Cayman 718 (982C) (2016 +) Porsche Panamera (970) (2009 - 2017)Porsche Panamera (971) (2017 +) Front Spacer SpecificationsSpacer material: Billet aluminiumSpacer finish: Clear anodisedSpacer thickness: 7mm per spacerSpacer overall diameter: 160mmSpacer centre hole (hub centre diameter): 71.6mmSpacer PCD of bolt holes: 130mm Rear Spacer Specifications Spacer material: Billet aluminium Spacer finish: Clear anodised Spacer thickness: 15mm per spacer Spacer overall diameter: 160mm Spacer centre hole (hub centre diameter): 71.6mm Spacer PCD of bolt holes: 130mm Non-Locking Front Bolt SpecificationsBolt thread size: M14 x 1.5Bolt thread length: 37mmBolt overall head width: 27mmBolt overall length: 67mm (inc the head)Bolt seat type: Radius (Round shaped)Bolt material: Heat treated carbon alloy steelBolt finish: Black zinc platedBolt spanner size: 19mm Hex Non-Locking Rear Bolt Specifications Bolt thread size: M14 x 1.5 Bolt thread length: 45mm Bolt overall head width: 27mm Bolt overall length: 75mm (inc the head) Bolt seat type: Radius (Round shaped) Bolt material: Heat treated carbon alloy steel Bolt finish: Black zinc plated Bolt spanner size: 19mm Hex Locking Bolt Kit Specifications Thread size: M14 x 1.5 Thread length: 35mm (front) / 45mm (rear) Overall bolt width: 24mm Overall bolt length: 63mm (front) / 72mm (rear) Seat type: Radius (round shaped) Bolt material: Heat treated carbon alloy steel bolt finish: Black zinc platedKey adaptor width: 29mm Key adaptor spanner size: 19mm Hex Key adaptor material: Heat treated carbon alloy steel

Price: 154.99 GBP

Location: Chelmsford

End Time: 2025-02-06T12:25:53.000Z

Shipping Cost: 61.88 GBP

Product Images

7mm 15mm ALLOY WHEEL SPACERS + BLACK BOLTS & LOCKS FOR PORSCHE 911 LUG NUT WIDE

Item Specifics

Return postage will be paid by: Buyer

Returns Accepted: Returns Accepted

After receiving the item, your buyer should cancel the purchase within: 60 days

Return policy details: Items may be returned to us for a refund or exchange within 14 days. A 20% deduction will be made to refunds where the returned item was supplied correctly and in good order. Please contact us through eBay prior to returning any item.

Centre Bore: 71.6mm

Number in Pack: 25

Items Included: Extra Long Bolt, Instructions, Lug Bolt, Lug Nut, Removal Tool, Spacer Disc, Wheel Lock

Manufacturer Part Number: BLK/FABe-911

Material: Aluminium, Carbon Steel

Grade: 10.9

Thread Size: M14 x 1.5

Reference OE/OEM Number: 10MM, 12MM, 16MM, 20MM, 996, 997, 991, HUBCENTRIC, SHIMS, BOLTS, LOCKS, SECURITY, 992, ALLOYS, BLACK

Placement on Vehicle: Front, Left, Rear, Right

Bolt Pattern: 5x130mm

Colour: Black

Brand: TWD