7k Trailer Axle - 7000 lb Electric Brake 8 lug (Dexter Compatible)

Description: How to properly measure your axle: Hub Face:measure from one end of the axle where the lug bolts protrude out from to the other end at the same point. This is the Hub Face. Spring Center:Measure from the middle of the spring on one axle to center of the other spring on the same axle.There should be about 15" difference between the Hub Face and the Spring Center measurement. Axle Specifications: Bolt Pattern: 8 lug on 6.5” Capacity per axle: 7,000 lbs Spindles: #42 spindle with 2-¼” seal journal Axle Tubing: 3” outer diameter .250 wall, Round Tube Spring Pads: Welded on Axle Brakes: 12” x 2” Electric Brake self adjusting brakes assembled on axle Under-slung leaf spring design: yes (axles sit on springs) Lubrication: Fast-Lube Grease (zerk fittings on spindle to easily grease hubs) Stud Size: 9/16" (we use 9/16" so you can run 16" or 17.5" wheels and tires with this axle) Pre Wired Replaces Dexter, Rockwell American, Lippert, Hayes, and AL-KO axles shipping: shipping to a commercial address with a forklift.You can also pick these items up at a freight terminal for no additional charge.(ask us to find a freight terminal for you to pick up at) or pick up at our distribution centerTrailer Parts Unlimited631 TX 75 NHuntsville TX 77320 check our website for even more products and bigger savings! TrailerPartsUnlimited Com

Price: 540 USD

Location: Huntsville, Texas

End Time: 2024-08-12T20:55:09.000Z

Shipping Cost: 200 USD