6069-410-015 Multifunction DAQ Device/ 8 single-ended analog inputs MCC

Description: Multifunction DAQ Device/ 8 single-ended analog inputs/ 16-bit resolution/ simultaneous sampling (100 kS/s max for any channel)/ 8 digital I/O/ 1 event counter/ External digital trigger input.The USB-1608FS-Plus provides simultaneous sampling with a sample rate of 100 kS/s maximum for any one channel, and up to 400 kS/s aggregate for multiple channels. The device also features a 32-bit event counter, 8 digital I/O lines, external digital triggering, and a bidirectional clock. An OEM version is available for embedded applications.Analog Input: The USB-1608FS-Plus device has a dedicated A/D converter per analog channel for simultaneous sampling. It offers software-selectable analog input ranges for ±10 V, ±5 V, ±2 V, and ±1 V.Digital I/O: Each of the eight digital I/O channels is individually-configurable for input or output. When configured for input, the digital I/O terminals can detect the state of any TTL-level input. The digital I/O channels are high-drive (24 mA) connections.External Clock I/O: The USB-1608FS-Plus has a bidirectional external clock terminal. When configured for input, A/D conversions can be paced by an external source. The USB-1608FS-Plus supports TTL-level input signals up to 100 kHz. When configured for output, this device can pace A/D conversions on a second device and acquire data from all input channels simultaneously.The USB-1608FS-Plus is an analog input and digital I/O data acquisition device providing the following features:Eight 16-bit single-ended (SE) analog input channels Each input channel has a dedicated A/D converter for simultaneous sampling. Software-selectable analog input ranges of ±10 V, ±5 V, ±2 V, and ±1 VEight individually configurable digital I/O channelsOne 32-bit event counterOne external digital trigger inputBidirectional external clock for synchronous operation with more than one device.Screw terminals for field wiring connectionsThe device is powered by the +5V USB supply from the computer, requiring no external power. The USB-1608FS-Plus is compatible with both USB 1.1 and USB 2.0 ports. The speed of the device may be limited when using a USB 1.1 port due to the difference in transfer rates on the USB 1.1 versions of the protocol (low-speed and full-speed). SPECIFICATIONSAnalog InputA/D converter type16-bit successive approximation type Channels: 8 single-endedInput configurationIndividual A/D per channel Sampling method: SimultaneousAbsolute maximum input voltage (CHx IN relative to GND)±15 V max Input impedance: 100 M? minInput ranges±10 V, ±5 V, ±2 V, ±1 V; software-selectable per channelSample rate (hardware paced)0.01 S/s to 100 kS/s, software-selectableThroughputSoftware paced500 S/s all channelsHardware paced (system-dependent)(400 kS/s)/(# of channels) max, 100 kS/s max for any channelBurst scan = 32,768 total samples (uses onboard FIFO)(800 kS/s)/(# of channels) max, 100 kS/s max for any channelGain queueUp to eight elements; one gain element per unique, ordered channel; software-selectableResolution16 bitsNo missing codes16 bitsCrosstalk (signal DC to 25 kHz)–80 dBTrigger source (software-selectable)External digital - TRIG_INDigital Input/OutputDigital type5 V TTLNumber of I/O8 (DIO0 through DIO7)ConfigurationIndependently configured for input or outputPull-up/pull-down configurationAll pins pulled up to 5 V via 47 k? resistors (default). May be changed to pull-down using an internal jumper.Input high voltage threshold2.0 V minInput high voltage limit5.5 V absolute maxInput low voltage threshold0.8 V maxInput low voltage limit–0.5 V absolute min; 0 V recommended minOutput high voltage4.4 V min (IOH = –50 µA); 3.76 V min (IOH = –24 mA)Output low voltage0.1 V max (IOL = 50 µA); 0.44 V max (IOL = 24 mA)Power on and reset stateInput

Price: 459 USD

Location: San Diego, California

End Time: 2024-02-28T21:52:44.000Z

Shipping Cost: N/A USD