Description: 600W MPPT Pure Sine Wave Grid Solar Grid Tie Inverter Adjustable Battery Discharge Power 48V 96V to AC 110V or 220V The latest produced item would be with new improved potentiometer and there would be no Aluminum fin heat sink for new produced 600W but with two fans. Specifications Rated Power 600W Input(DC) PV open voltage range 26V-45V 39V-60V 55V-90V 85V-130V 120-180V PV MAX input power(W) 7000W MPPT Voltage range(V) 22-34VDC 33-47VDC 44V-70VDC 66-100VDC 90-140V MPP tracking efficiency >99% MAX.DC current(A) 30A 20A 15A 10A 10A Suitable for Battery voltage(V) 24V 36V 48V 72V 96V Battery Low Voltage Protection(V) 22V 33V 44V 66V 88V Output(AC) PV mode AC MAX output (W) 500 Battery mode Max output power 450W 450W 450W 450W 450W AC output range 220VAC(190-260VAC) or 120VAC(90-135VAC) Frequency range 50Hz(48~52) or 60Hz(58~62) Power Factor >98% THD <5% Phase Shift <1% Stable real efficiency / 120V 87% 88% 89% 89% 91% Stable real efficiency / 220V 88% 89% 91% 92% 94% Other electrical data Protection Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection Work Temperature ‘-25°C~ 80°C Work Humidity 0%~90%RH non-condensing Grade of Waterproof Outdoor design IP22 LED Show R&G&B LED Cooling Fan Stand-by Power <1W Matching component: Monocrystalline ,polycrystalline , thin-film solar panels. Mechanical data Net Weigtht 2.2kgs/pc Gross Weight 2.5kgs/pc Machine size(LxWxH) 22.2x16.2x6.5CM Packing Size (LxWxH) 32x22x12CM PV grid-connected inverter operating mode The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Conversation process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find. Startup - When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition. Grid-tied begin - Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under different daylight and temperature conditions. Standby - Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode. Stop - Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode. When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator. (Battery) discharge and grid mode(With ADJ function models) 1.The DC input of the system can be directly connected with the battery, Turn the knob of the inverter to the right into the battery mode, then the tracking function will be turned off, the output power will be adjusted from left to right, At this point the output power can be adjusted from 80W-450W or so arbitrary output to ensure that the inverter can work for a long time in the grid status. 2. When the inverter connected to the battery discharge, if the battery voltage is too low, the inverter will automatically stop and cut off grid output to protect the battery over discharge to extend battery life. 3.Different specifications of the input voltage of the inverter will be used with different voltage battery, the battery voltage protection point please refer to the following Battery voltage Inverter Input Battery Low voltage protection Battery high voltage protection 12V battery 16V~28V 11V 14.5V 24V battery 26V~45V 21V 29V 36V battery 40V~62V 33V 43.5V 48V battery 55V~90V 44V 58V 60V battery 48V~86V 55V 72.5V 72V battery 85V~130V 66V 87V 96V battery 120V-180V 88V 120V On Jun 14, 2024 at 06:28:40 PDT, seller added the following information:
Price: 162.99 USD
Location: guangzhou
End Time: 2024-09-14T09:01:27.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Custom Bundle: No
Weight: 2.2
Is Smart Device: No
Output Frequency: 50/60Hz
Output Power: 401 - 600KW
Output Type: Single
Brand: Unbranded
System Configuration: Grid-Tie
Type: Charger/Inverter
Current Type: AC/DC
Current Output: Other
Features: Durable
Application: Agriculture/Farming
Resistance Properties: Other
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: AC 110V / 220V
Power: 600W
Model: GTN-600ADJ
Current Rating: Other
MPN: Does Note Apply
Power Source: Solar
Inverter Technology: Microinverter
Color: Blue
Country/Region of Manufacture: China
Recommended Environment: Indoor/Outdoor
California Prop 65 Warning: No
Item Length: Standard
Material: Metal
Size: 22.2x16.2x6.5CM
Available Variations
Color: PV 55-90V Bat 48V
Price: 162.99 USD
Available Quantity: 10
Quantity Sold: 0
Color: PV 55-90V Bat 48V
Price: 162.99 USD
Available Quantity: 10
Quantity Sold: 0
Color: PV 120-180V Bat 96V
Price: 179.99 USD
Available Quantity: 10
Quantity Sold: 0
Color: PV 120-180V Bat 96V
Price: 179.99 USD
Available Quantity: 10
Quantity Sold: 0