Description: Cool white pico bulbs give a more modern lighting effect to your dollhouse miniatures, models, Gundam, artwork or anywhere you need tiny lights. This circuit has six bulbs that are very bright. The photos don't do them justice! This circuit is assembled for you with an on/off switch, a 3V battery holder, 1 CR2032 battery included, and a quick disconnect to make it easier to route the wiring. The entire assembly is approximately 15" long from the battery to the bulbs and 7.5" from the connector to the bulbs. Take a look at the 1:24 scale cars by Jay Hermosura where he used the pico bulbs in his model cars. I included photos of Leanna Bond's 1:144 scale house that has warm white pico bulbs to show how the bulbs and battery are installed.Pico bulbs are 1mm wide and .5mm high (.04" x .02" approximately) and have a bright side and are less bright on the back side. The quick disconnect is approximately 1/8" x 1/16" to allow for a small drill hole if installing in an assembled dollhouse or in a completed model. The connector works well if you make your light into a lamp and need a 1/8" hole to install the lamp in your room. The bulbs are so small that a tiny hole is all that is needed if you only need to put the light through a wall or ceiling. I can send one CR2032 battery with the set as long as it's installed in the battery holder. The set is shipped in a plastic box so the switch can't be turned on accidentally.Outside the US - I cannot send a battery with the set due to the new post office rules.Please be aware that any dates given by the post office or eBay are estimates for delivery times only and may vary. We can offer no guarantee on delivery times after it's mailed.Please email if you have any questions.Postage outside the US is $25.
Price: 26.99 USD
Location: Dallas, Texas
End Time: 2024-12-25T02:53:28.000Z
Shipping Cost: 5.9 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Type: Doll Houses
Features: Artist Made
Country/Region of Manufacture: United States
