6 inch pvc drain cap sewer drainage pipes piping underground fitting connector f

Description: Seal the end of 6 in. Sewer and Drain (S&D) pipe with the 6 in. PVC S&D Cap. This cap is used to stop the flow of water at the end of the pipeline. The cap is made of heavy-duty polyvinyl chloride (PVC) and can be solvent-welded for a watertight connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. offers free tools such as the Home Drainage Center, Calculators, and Stormwater Drainage mobile app to help make your project a success. Founded in 1972, is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right. CLOSES THE END OF PIPE: As part of a complete drainage system, the PVC cap closes off the end of the pipeline to stop water flow and direct water in the system toward an open end MAKES SEWER & DRAIN PIPE CONNECTIONS: Caps the beginning or end of the pipeline to stop the water flow and direct water toward the open end WHERE TO INSTALL: Connects to end of 6 in. Sewer and Drain (S&D) pipe SOLVENT-WELD FOR A WATERTIGHT CONNECTION: Made of polyvinyl chloride (PVC) for Hub X Hub solvent-weld connections SPECIFICATIONS: Works with Sewer and Drain pipe per ASTM D 2729, D 3034, D 2751 and F 810; Not compatible with DWV Schedule 40 pipe and fittings per ASTM D 2665

Price: 14.47 USD

Location: Miami, Florida

End Time: 2025-01-06T00:41:06.000Z

Shipping Cost: 0 USD