4x Wireless Home Door Motion Detector Sensor Burglar Security Alarm System

Description: Product description: Using electromagnetic induction technology, easy to install. The open state, as long as the open windows and doors, the machine will send out 110db alarm（test distance 30 cm）. Let you stay away from anti-theft doors and windows have to bring you the inconvenience. How to use: Just on the back of anti-theft security alarm tear tape were affixed to the doors or windows on both sides (left about 5 mm gap), when you use, just switch to the "ON" position, it will stand in the open state, if someone will move the door, drawer or computer chassis or window open a gap of about 1 cm, it will immediately sound an alarm to deter thieves and alert you to view until you switch to the "OFF" position, or you close the doors and windows, computer chassis drawer stop.EXTERIOR STRUCTURE ON/OFF Switch Magnet Double-sided sticker Electrical Specification Model: KS-SF19 Certification:CE,CCC,CQC Material:This host is with new import ABS shell,more durable! The romoter is with metal drawing effect,more up-market Host size:305618mm(1.18"2.2"0.7" )(Approx.) Magnet size:93513mm(0.35"1.38"0.51")(Approx.) Weight:38 (g) Color:White Batteries:3pcs LR44 button batteries.(Contain batteries) Battery standby life time:More than 12 months.(according to control five times a day) Transmission frequency:433.92 (MHZ) Alarm volume:110dB (test distance 30 cm) Gap distance of instanding the distand between the host and the magnet<1cm Operating Temp:-10C ~60C Storage Temp:-20C ~70C Working environment humidity: < 80% Battery installation Batteries installation: Put the batteries into it Please change all three batteries at one time, do not mix the old battery with new battery which may cause the short battery life or smaller sound. INSTALLATION Choose the location of a door or window to install the alarm. Paste the alarm and the magnet on the door and the doorframe with the sticker. Please notice that the line on the magnet should match the line on the alarm. NOTE The alarm should be used indoor only. Dont install it at the place where there is sunshine or rain. The magnetic sensor is at the right side of the host, so the magnet should be installed on the right side of the alarm host If the alarm is installed on the door, please install the magnet on the frame of the door. If you install the alarm on the frame of the door, then install the magnet on the door. Make sure that when the door is opened, the magnet is separated from the alarm, so that it can be detect and trigger alarm. When installing, make sure the distance between the alarm and the magnet should not be more than 10mm when the door or window is closed. HOW TO USE Arming mode one (it will keep alarming when the magnet is apart from alarm host) 1. Turn on the switch, the alarm host will sounds two short beep De.De indicating its in arming mode one. 2. In this state, once the magnet is apart from the alarm host, it will keep giving out alarm until the magnet and alarm get closer again or someone turns off the switch. Arming mode two (it will give out alarm sound for 30s once the magnet is apart from the alarm host) 1. First, make sure the magnet and alarm host are in the safe distance(10mm). 2. Turn on the switch, it will sounds De.De, within 15 seconds after the beeps, turn down and up the switch, then it will sounds a longer beep De.indicating its in the second arming mode. 3. In this mode, when the door or window is open it will give out alarm for 30s until someone turn off the switch. Closing door reminder mode 1. First, make sure the magnet and alarm host are in the safe distance(10mm). 2. Turn on the switch,it will sounds De. De, after the beeps, turn down and up the switch, it will sound De, after this beep, turn down and up the switch again, then it will sounds three short beep Di Di Di indicating its in the closing door reminder mode. 3. In this mode, when the door or window remains open, it will sounds Di Di Di to remind the door or window is open, and the beeps will become louder and louder until the door or window is closed or you turn off the switch. Doorbell mode 1. First, make sure the magnet and alarm host are in the safe distance(10mm). 2. Turn on the switch, it will sounds De. De, after the beeps, turn down and up the switch, it will sound De, after this beep, turn down and up the switch again, then it will sounds three short beep Di Di Di, after this beep, turn the switch down and up again, it will sound Ding Dong indicating its in doorbell mode. 3. In this mode, when you open the door or window, it will sound Ding Dong once. Battery low indicate 1. When the alarm battery runs low, every time you turn on the power, the alarm host will sounds Du for about half second. 2. when the alarm works in low battery, it will give our Du..Du every half an hour. 3. When the alarm is in low battery state, it still can work for about 10 ~30 days, please replace the battery.

Price: 19.39 USD

Location: South El Monte, California

End Time: 2024-12-06T09:40:49.000Z

Shipping Cost: 0 USD