4'' Drop Lowering Kit For Chevy C10 R10 GMC C15 73-87 2WD Hangers & Shackles

Description: Home --> --> --> --> --> --> --> --> --> --> --> --> Contact us Home Favoris newsletter Contact us --> --> --> PRODUCTS --> FAQ--> ABOUT US --> Shipping--> --> Return & Warranty--> 4'' Drop Lowering Kit For Chevy C10 R10 GMC C15 73-87 2WD Hangers & Shackles --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> Fitment: For Chevrolet C10/R10 1973 - 1987 for GMC C15 /C1500 / C1500 Pickup 1973-1987 Note: for 2WD and short box only Specification: Placement on Vehicle: Left, Right, Rear Drop Length: 4in. Drive Model: 2WD Only Material: Steel Package Size: 36.5*19*15.5cm Package weight: 7kg Surface: Powder coating Package Includes: 2x Rear Drop Shackles (1.5" / 2" Adjustable) 2x Rear 2" Drop Leaf Spring (Gunmetal Gray Steel) Necessary hardware included Installation Tips: How to Install a Leaf Spring Hanger? Replacing a leaf spring hanger is rather easy. The leaf spring hanger installation consists of a few simple steps. You should lift your truck with a jack and place it onto jack stands. Then you should remove the front leaf spring from the hanger. Grind off the rivets that are holding the hanger and then hammer them out. Bolt the leaf spring hanger kit into the frame where the previous rivet holes were. Bolt the leaf spring to the hanger. The tricky part of the installation will be taking the rivets off. How to Install or Replace Leaf Spring Shackles? Using a floor jack, raise the rear differential of your vehicle off the ground, Use jack stands under the frame to support the vehicle Lower the jack so that the suspension "droops", this will take the weight of the vehicle off the shackle and allow for removal of the mounting bolts Remove the lower mounting bolt from the shackle and spring and then lower the axle so that the spring drops out of the shackle Remove the upper mounting bolt which attaches the shackle to the mount on the frame then remove the existing shackle Insert the new shackle and mounting bolt. Leave the bolt loose to allow alignment of the shackle with the spring Raise the rear axle and align the spring eye with the shackle. Slowly work the spring back into the shackle, raising the jack a little at a time until the holes in the shackle and the spring eye line up. Install the mounting bolts through the shackle and the spring. Make sure to tighten accordingly Jack up the car to remove the jack stands then lower the vehicle back down Make sure the bolts stay tightened with weight on them Images--> 4'' Drop Lowering Kit For Chevy C10 R10 GMC C15 73-87 2WD Hangers & Shackles--> 4'' Drop Lowering Kit For Chevy C10 R10 GMC C15 73-87 2WD Hangers & Shackles Other items you might also like Maxpeedingrods 24 Way Damper Suspension Coilovers Struts for Chevy Camaro 10-15 Spark Plug Ignition 9059 Wires X8 for Chevy Suburban, Tahoe Gen III LS1 1999-06 8x Ignition induction Coil for Chevrolet Avalanche/Express/SSR/Silverado for GMC Connecting Rods For GMC SGE 1.5 T LFV Chevrolet 127.4mm 800HP w/ARP 2000 Bolts 8x 4340 Forged Connecting Rods+ARP 8740 Bolts for Chevy LS Small Block 6.125" 8 Pieces Connecting Rods for Chevy Chevrolet LS Series V8 engine ARP 7/16" Bolts TD04L Turbo for Chevy Malibu GMC Terrain Cadillac CT6 ATS 2.0L 49377-07810 Forged H-Beam Connecting Rods For Chevrolet Chevy Small block V8 engine 5.7" Front Complete Struts Rear Shocks For Chevrolet GMC Suburban Tahoe Yukon XL 1500 1x Turbo Cartridge Core Chra For Isuzu For GMC 5.2L 4HK1 29006N6520 898027-7735 TB2568 Turbo Charger for Isuzu NPR GMC Truck w/ 4BD2-TC Engine 3.9L 1995-1998 Set of 8 Ignition Coil for Chevy Tahoe Hummer H2 GMC Yukon Cadillac UF271 D581 --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> --> PAYMENT OPTIONS

Price: 173.32 USD

Location: HK

End Time: 2024-02-25T01:31:52.000Z

Shipping Cost: 0 USD