3M Dynatel 2250M Cable Pipe Locator w/ Transmitter 2250 5W

Description: 3M Dynatel 2250M Cable Pipe Locator w/ Transmitter 2250 5W This is a used 3M Dynatel 2250M Cable Pipe Locator w/ Transmitter 2250 5W that is tested and working. Includes: 3M Dynatel 2250M Cable Pipe Locator 3M Dynatel 2250 Transmitter 3M Dual Clip Coupler Cable 3M Coupler Cable 3M 3001 Dyna Coupler Case Stake 3M Dynatel 2250M Cable Pipe Locator Innovative technology for locating underground utilities without any doubt 3M™ Dynatel™ Cable/Pipe Locator 2250M and Cable/Pipe and Marker Locator 2250M-iD incorporate advanced electronics to quickly and efficiently trace the path of underground cables and pipes (with metallic tracer wire). They provide accurate cable/pipe, or Sonde depth measurements, giving a digital readout in inches, feet and inches, or centimeters (user-selectable). Lightweight, compact and well-balanced, these cable and pipe locators allow you to accurately and easily: Locate cable and pipe path Measure cable/pipe, or Sonde depth with the push of a button Display relative signal current in the cable or pipe Identify cable using toning Tone shorts and grounds in aerial cable Identify cable pairs through wet sections Locate energized power and CATV cable Advanced features detect more information about underground utilities A feature exclusive to the 3M™ Dynatel™ Cable/Pipe and Marker Locator 2250M-iD is the ability to write, read and lock programmed information into the 3M™ Electronic Marker System iD Ball Markers 1400 Series. Information such as a pre-programmed unique identification number, facility data, owner information, application type, placement date and other details from up to 100 markers can all be stored with date/time stamp, and GPS coordinates*, and transmitted back to your PC through a standard RS232 serial port for enhanced resource management. Designed to be more accurate, faster and more integrated, the new locators can perform these additional functions: Pinpoint the location and estimate the depth of all existing models of properly installed underground passive EMS markers Conduct direct depth reading of RFiD markers Locate two different marker frequencies simultaneously Trace a cable or pipe path while simultaneously finding buried markers along the way EXCLUSIVE GPS system adds accuracy with ease The 2250M/2250M-iD locators are now compatible with select GPS/GIS field mapping instruments for real-time mapping of marker placement. The customized Dynatel interface remotely commands the GPS/GIS device allowing even a generalist field technician to perform real-time mapping. Exporting information directly into leading CAD and GIS systems creates an automated paperless system for records updating. Several unique modes of operation for accurate locates in every situation For cable or pipe locating, 2250M/2250M-iD locators have a highly accurate multi-antenna design for various user-selected locating modes—Directional Peak, Multi-Directional Null, plus an ultra-sensitive Special Peak mode for extreme depths. A unique “expander” function makes peaks and nulls more pronounced. Directional Peak mode combines the response from four peak antennas to indicate direction to the cable/pipe while a bar graph and numeric display indicate the sharp and accurate dual-peak response. Semi-automatic gain set with manual override provides maximum flexibility and control. Multi-directional null mode shows null signal response with automatic gain and shows cable/pipe location and direction on a unique compass-like graphic display. A simple, easy-to-use system The 3M™ Dynatel™ Cable/Pipe Locators 2250M/2250M-iD require very little operator training. An RS232 communications port allows interface to an external computer for uploading/downloading of data, unit configuration and remote software upgrades. Estimated operating time is more than 30 hours on eight AA alkaline batteries. The system consists of two basic components: Transmitter with built-in ohmmeter, which also measures the presence of foreign voltage and tests the continuity of the circuit. Rugged, one-piece hand-held receiver with large high-resolution LCD display. Bar graph signal strength and direction indicates received signal and proximity to the cable. M-iD versions locate and read/write to all EMS-RFiD markers. The 2250M/2250M-iD locators use four active trace frequencies (individually or simultaneously) to compensate for varying field conditions. The receiver incorporates passive power, CATV, and auxiliary frequencies that do not require the use of the transmitter. The receiver also offers four user-definable auxiliary frequencies. With the easy-to-use configuration tool, users can enable or disable any of 22 frequencies. Both the receiver and the transmitter feature a self-test routine that is executed each time the unit is turned on. Specifications: Operating temperature -20° C to 50° C (-4° F to 122° F) Storage temperature -20° C to 70° C (-4° F to 158° F) Standard IP54 Regulatory CE (Export Models Only) PHYSICAL specifications Transmitter size (H x W x D) cm (in.): 17,2 x 28,6 x 19,7 (6.75 x 11.25 x 7.75) weight (including batteries) 2,4 kg (5.2 lb.) Receiver size (H x W x D) cm (in.) 26,7 x 26,1 x 76,2 (10.25 x 10.5 x 30) weight (including batteries) 2250M – 1,9 kg (4.05 lb.), 2250M-iD – 2,3 kg (4.85 lb.) Transmitter Output frequencies Trace mode 577Hz, 8kHz, 33kHz, 200kHz (577Hz, 8kHz, 33kHz, 133kHz CE Approved Models) Sheath (earth return) fault mode 10/20 Hz for sheath (earth return) fault; 577Hz and 33kHz for tracing Tone mode 577Hz and 200kHz pulsed at 8Hz Induction mode 33kHz, 200kHz Output voltage (maximum) Sheath (earth return) fault 70 Vrms Trace 70 Vrms Tone Normal setting: 10 Vrms, high setting: 60 Vrms Output power Normal setting: Limited to 0.5W High setting: Limited to 3W, or 5W with external DC power Output protection 240 Vrms Power Battery type: Six C size, alkaline (LR14) cells; External DC: 9-18V DC (1A) (5-watt units only) Typical battery life Normal output level: 50 hours High output level: 10 hours Physical Specifications Size Transmitter 6.75" H x 11.25" W x 7.75" D (17.2 cm x 28.6 cm x 19.7 cm) Receiver 25.5" H x 3.75" W x 10.75" D (64.8 cm x 9.5 cm x 27.3 cm) Weight Transmitter 5.2 lbs. (2.4 kg) Receiver 4.1 lbs. (1.8 kg) Shipping 14.3 lbs. (6.5 kg) Environmental Specifications Operating temperature 4° to 122°F (-20° to 50°C) Storage temperature -40° to 158°F (-40° to 70°C) Electrical Specifications Receiver Frequencies Trace and modes Active: 577 Hz, 8 kHz, 33 kHz, 200 kHz Passive Power: 50/60 Hz, user-selectable: L50/L60-5th harmonic, H50/H60-9th harmonic, 100/120-rectified power Auxiliary: ‘T’ model: 31.5 kHz, 512 Hz, 560 Hz ‘P’ model: 31.5 kHz Depth Range: 0 to 30' (0 to 9 m) Accuracy: ±10% ± 1 digit for 0 to 60” (0 to 1.5 m) ±15% for 60” to 180” (1.5 to 4.5 m) ±20% for 180” to 360” (4.5 to 9 m) Power Six alkaline “AA” (LR6) cells Typical battery life 50 hours

Price: 3097 USD

Location: Katy, Texas

End Time: 2025-01-26T00:36:04.000Z

Shipping Cost: 0 USD